Charge Level Indicator (On-Board Computer); Indicator For Motor Power Used; Gear Recommendation Indicator - Bosch Intuvia Translation Of Original Operating Instructions

3.4.2.3 Charge level indicator (on-board
computer)
The battery level indicator displays the pedelec
battery level, not the level for the on-board
computer's internal battery. If the on-board
computer is removed from its mount, the last
battery level displayed is saved. Each bar in the
battery symbol on the screen represents 20%
capacity.
Symbol Meaning
The battery is fully charged.
The battery needs to be recharged.
The LEDs on the battery level indicator have
gone out. The capacity for drive assistance has
been used up and assistance is gently
switched off. The remaining capacity is
reserved for lighting and the on-board
computer. The screen flashes. The pedelec
battery capacity is sufficient to provide 2 more
hours of lighting. Other electrical loads, such
as automatic gears and charging of external
devices connected to the USB port, are not
taken into account here.
Table 13: Overview of battery level indicator
If a pedelec is used with two batteries, the battery
level indicator shows the charge level for both
batteries.
If both batteries are being charged on a pedelec,
the function display shows the charging progress
for both batteries. You can see which of the two
batteries is being charged as the indicator will
flash on the battery being charged.
Figure 40: The left-hand battery is being charged
You can also see the battery charge level on the
level indicator LEDs (battery).
MY22B01 - 12_1.0_26.08.2021
All manuals and user guides at all-guides.com
OF
MP H
KM /

3.4.2.4 Indicator for motor power used

If the motor is active, the indicator for the motor
power used is shown on the on-board computer
display. The maximum motor power depends on
the selected level of assistance. A long bar
indicates high power consumption.

3.4.2.5 Gear recommendation indicator

Pedalling frequencies higher than 50 revolutions
per minute optimise drive unit efficiency.
However, very slow pedalling uses up a great deal
of energy. The speed and range can be increased
while applying the same force if you select the
right gear.
The gear recommendation function reacts to
excessively slow or excessively quick pedalling
and recommends a change of gear.

The gear recommendation function has to be
switched on in the system settings.
Symbol Use
Pedalling frequency is too high, a higher gear is

recommended
Pedalling frequency is too low, a lower gear is

recommended
Table 14: Symbols of the gear recommendation function
Description
43