Panasonic NC-KD300 Operating Instructions Manual page 12

Available languages

Turn on the power switch.

(Press "

During use, the power

indicator lights up.

When the water is boiled, the power switch turns off

automatically.

( The appliance takes around 7 minutes to boil.

Water temperature 23 °C, room temperature 23 °C,

water to max level, 220 V.)

• To stop boiling before the water

isboiled, turn off the power

switch.

Note

• Immediately after the water is boiled, do not

force the appliance to continue heating the

water by keep pressing the power switch.

(It may cause malfunction.)

Boil-dry protection

When the power switch is on without water, a boil-dry protection works to automatically turn off the

power in order to prevent accidents and malfunction due to overheating.

① Allow the body to cool sufficiently.

② Remove the body from the power base and fill the water.

③ Place it on the power base and turn on the power switch again.

* If you switch on the appliance when there is no water in it, it may smell strange.

电水壶KD-300海外向说明书_A5_M1_20220704.indd11

(

)

Start boiling the water.

Power indicator

lights up.

Remove from the power

base and pour.

■ After use, pour out any remaining water.

* Keep the lid closed when pouring away the

water.

EN11

2022/7/418:07:44