Simple Wired Remote Controller; Using The Mode Function - LG ABNW36GRLT0 Owner's Manual

OPERATING INSTRUCTIONS
20
<Simple Wired Remote Controller>

Using the Mode Function

This function allows you to select the desired
function.
Cooling Mode
Turn the appliance on.
1
2
Press button repeatedly to select the
Cooling Mode.
a
- is displayed on the display screen.
a b
3 Press or button to set the desired
temperature.
Heating Mode
1 Turn the appliance on.
2 Press button repeatedly to select the
Heating Mode.
d
- is displayed on the display screen.
a b
Press or button to set the desired
3
temperature.
NOTE
What is the three-minute delay function?
It will take time for the product to blow
warm air. The delay is to protect the
compressor.
The room will be heated with warm air
after three minutes when the compressor
begins operation.
Auto Operation
This mode automatically sets the fan speed
and temperature depending on the room
temperature.
Turn the appliance on.
1
2
Press button repeatedly to select the
Auto Operation.
C
- is displayed on the display screen.
a b
3 Press or button to set the desired
temperature.
É
4 Press button repeatedly to adjust the
fan speed.
Code
2
1
0 Maintain room temperature
-1
-2
NOTE
• In this operation mode, the system is
automatically operated by the electronic
controls.
- Setting temp range:
Common: 18 °C ~ 30 °C
UAE Only: 20 °C ~ 30 °C
• It can be switched to another operation
mode manually.
• This function properly operates when
you use the remote controller that goes
with each model.
• Some functions may not be supported,
depending on the model.
Description
Cold
A little cold
A little hot
Hot