Table of Contents
Advertisement
_(_nUTO : Automatically
turns on and off
according
to the ambient brightness.
_CaON
: Always turns on.
To turn off the built-in light
Press LIGHT repeatedly
until no indicator
appears on the screen.
Notes
• The built-in
video light emits very bright light,
which is perfectly
sail: in normal use. However,
avoid directly
aiming
the light at a subject's
eyes
from very close range.
• The battery
pack discharges
quickly while the built-
in light is turned on.
• When you do not use your camcorder,
turn the built-
in light off and remove the battery
pack to avoid
turning
on the built-in
light accidentally.
• When flickering
occurs while shooting
in the
_CaAuTO
mode, press LIGHT until _C_ON
appears.
• The built-in
light may turn on/off when you use the
[PROGRAM
AE] or back light function while
shooting
in the _C_RUTO
mode.
• For DTRV28fl:
The huilt-in
light is turned off during the interval
time of Interval
recording.
• When you use the conversion
lens (optkmal),
light
from the buihqn
light is blocked
anti may not
illuminate
the subject
properly.
You can turn the LCD panel towards
the
subject so that you and your subject
can share
the image being recorded.
You can also
utilize this function
when recording
yourself,
or to keep the attention
of small children
attracted
to the camcorder
while you record
them.
Open
the LCD panel
90 degrees
to the
camcorder,
then rotate
it 180 degrees
towards
the subject.
A mirror=image
of'the suhject appears on the
LCD screen, but the picture will be normal
when recorded.
Notes
For _|iN
TRV 1381338:
• @ appears
in the viewfinder
anti on the LCD
screen. I1•
appears in the standby
mode, and •
appears
in the recording
mode. Some of olher
indicators
appear mirror-reversed
and others are not
displayed.
• During recording
in the mirror mode, DATE and
TIME on your camcorder
do not x_ork.
24 Recording
Advertisement
Table of Contents
