Strut Damper Assembly - Suzuki GA413 Manual

STRUT DAMPER ASSEMBLY

REMOVAL
1) Disconnect negative cable at battery.
2) Hoist vehicle, allowing front suspension to hang free.
3) Remove wheel.
4) Remove E-ring securing brake flexible hose and take brake flex-
ible hose off strut bracket as shown.
5) Remove wheel speed sensor harness clamp bolt from strut (if
equipped with ABS).
6) Remove strut bracket bolts.
7) Remove strut support nuts.
Hold strut by hand so that it will not fall off.
8) Remove strut assembly.
1. Nut
FRONT SUSPENSION (4WD) 3D1-9