Sony TCM-1000A Service Manual

Recording system
Fast winding time
Frequency response
Tape speed
Speaker
Power output (DC)
Input
Output
Power requirements
Battery life
Dimensions
Weight
SPECIFICATIONS
2-track 1-channel monaural
Approx. 2min. 30sec. with Sony
cassette C-60
100~8,000 Hz
4.8cmisec. (17,ips) '2% adjustable in playback
Approx. 4.5cm (11%4,inches) dia.
Speaker: 320 mW (at 10% harmonic distortion)
Microphone input jack (PLUG-IN-POWER)
(minijack)
sensitivity 0.2mV for 3k2 or lower impedance
Earphones jack (stereo minijack)
load impedance 8-300 2
3V DC, two R6 {size AA) batteries
DC IN 3V jack accepts:
optional Sony AC-D2M AC power adaptor
available in European countries for use on
220 V AC, 50 Hz
available in other countries for use on 120V
AC, 60 Hz or 220V AC, 50Hz
optional Sony DCC-70 car battery cord
for use on 12V car battery
(hours)
Batteries
Sony battery SUM-3(NS)
Sony alkaline battery AM3(N)
Approx. 161.5x31.5x 109.7 mm (wih/d)
(6%, « 11,44 inches)
incl. projecting parts and controls
Approx. 400g (1402) incl. batteries, not
incl. other accessories
Recording
Approx. 3
Approx. 7
AEP Madel
Model Name Using
Similar Mechanism
Tape Transport
Mechanism Type
TCM-1000
MT-1000-30
FEATURES
¢ Pre-end reverse function reverses the direction of the tape
before the tape comes to an end, so recording is not
interrupted.
* TONE switch cuts out background noise and concentrates on
the frequencies of human voice to allow easier listening to
conference recordings.
¢ Pre-end alarm and pre-end indicator notify you of the
approaching end of the tape.
¢ MIC (PLUG IN POWER) jacks supply power to an optional flat
microphone like Sony ECM-K8.
¢ Built-in flat microphone
Note
if a car battery cord or AC power adaptor not manufactured by Sony is
used, a fuse must be installed in the battery cord, or the AC power
adaptor and the polarity of the piug must be as illustrated.
CASSETTE CORDER
TC