Cover (Jack) Block - Sony SRS-X7 Service Manual

2-17. COVER (JACK) BLOCK

2 three tapping screws
(P B2.6)
3 cover (JACK) block
1 Remove the wire
from two lead pins.
– Front top view –
ire ettin
1 Raise a ferrite core and
align the bended line with
the undersurface.
bended line
MAIN board lead pin
1 Arrange the lead pin in the
direction of the arrow.
2 Arrange the lead pin in the
direction of the arrow.
2 Bend the flexible flat cable
and fix a ferrite core in the
position of a figure.
bended line
lead pin
CN404
3 Arrange the lead pin in the
direction of the arrow.
ire ettin
rib
OK
cushion
rib
NG
cushion
Cushions are not center.
rib
3 Press the portion in which
flexible flat cable remained
against a ferrite core.
1 Bend the flexible flat cable.
2 Turn up the flexible flat cable.
NG
Do not overflow.
SRS-X7
rib
Cushions are center.
cushion
guide line
rib
cushion
guide line
rib
4 Paste the filament tape
(sub material).
guide line
3 Paste the filament tape
(sub material).
23