Advertisement
Care and Cleaning Instructions
Machine Wash
1. Unplug the controller first, put the product in the wash machine, fill with warm water
and add small amount of detergent, soak for 5 minutes.
2. Spin at normal speed for 2 minutes; After cleaning, rinse with clean water.
3. Stir for 1 minute and spin to dry; Clean and dry under gentle mode.
4. Remove damp product from the washer, spread to original size and line dry.
Hand Wash ( Recommended )
1. Unplug the controller first, and wash with small amount of mild laundry soap or
detergent.
2. Soak the product by hand in a tub filled with warm water for 5 minutes.
3. Gently rub the product up and down for 5 minutes. NEVER rub intensely to avoid
damaging heating elements; Rinse thoroughly in warm water till all traces of soap or
detergent are gone.
4. Squeeze out excessive water by hand. Line dry by simply draping the product over
two parallel clotheslines or a shower rod.
Warning
1. Do not iron.
2. Do not dry clean.
3. Do not bleach.
4. Do not wring.
Storage
1. If the product is not to be used for long, unplug it from the power supply and store
in a proper way.
2. Do not try to dry the product by connecting it to the power supply.This product and
its connection ports should be kept dry during use.
3. This product should be completely dry and be put in a cool and shady place for storing.
Do not put heavy objects on top of it.
IMPORTANT:
UNPLUG THE CONTROLLER BEFORE WASHING.
NEVER PLUG IN YOUR HEATED PRODUCT WHILE DAMP.
DO NOT USE ON PULL-OUT BED OR FOLD-UP BED.
Advertisement
