Before Setting Oven Controls; Air Circulation In The Oven - Kenmore ELITE 75909 Use & Care Manual

Table of Contents

Advertisement

Before Setting
Oven Controls
Arranging
Oven Racks
(Some models may have one rack.) ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS
COOL (PRIOR TO OPERATING THE OVEN). Always use oven mitts when using the oven.
Oven Vent Location
The oven vent is located below
the
backguard.
When the oven is on,
warm air is released through
the
vents. This venting is necessary for
proper air circulation
in the oven and
good baking results.
OVEN VENT
Removing and Replacing Oven
Racks
To remove,
pull the rack forward
until it stops. Lift up front
of rack
and slide out. To replace,
fit the
rack onto the guides on the oven
walls. Tilt the front of the rack
upward and slide the rack back into
place,
Arranging Oven Racks
To bake on 1 rack, place the rack in
position 3 or 4. To bake on 2 racks,
)lace the racks in positions 2 and 4.
To bake on 3 racks, place the racks
m positions 1, 3 and 5.
Air Circulation
in the Oven
If using multiple pans, stagger
as shown.
If using one pan, place in center
of oven.
......
For best air circulation and baking results, center pans as much as possible.
Allow 2-4"
(5-10 cm) around the utensil(s) for proper air circulation and be sure pans do not touch
each other, the door, sides or back of oven. The hot air must circulate around the pans
in the oven for even heat to reach all parts of the oven.
16

Advertisement

Table of Contents
loading

Table of Contents