Remote Control - Acer CAM570 User Manual

Remote Control

Name
1. Camera
Select
2. Directional
Pad
3. SmartFrame
4. OSD Menu
5. Zoom In/Out
6. Preset
7. Number Pad
8. Brightness -
9. Call/Answer
10. Enter
11. Mute
12. Volume
13. Load Preset
14. Brightness +
15. Hang Up
Function
No selection is required by default to operate the
camera.
 Camera Binding is turned off by default and all
three selections can operate the camera.
 To specify a number, go to Setting > Camera
Binding on the web interface or in PTZ App2.
Press once for incremental movement or press and
hold for continuous pan or tilt.
Short press to frame entire group on screen and
remove excess space. Long press to switch
between tracking modes.
Note:
 The SmartFrame icon
when turned on. To hide the icon, go to the
Setting tab > On-Screen Menu > Off on the
web interface or in PTZ App2.
 The effective distance is up to 7-10 meters.
 AI functions will be turned off if pan, tilt and
zoom controls are used.
Short press to open the OSD menu during HDMI
output. Press and hold for 1 second to select a
screen layout or picture-in-picutre (PiP).
Zoom in or out.
 To save a preset: Press and hold the Preset
button until the save message appears on
screen and release, then short press the
Number Pad (0-9).
 To load a preset: Press and hold the Preset
button and release, then short press the
Number Pad (0-9).
Decrease image brightness.
N/A
Display current AI function during HDMI output.
N/A
N/A
With each press, cycle through defined presets.
Increase image brightness.
N/A
4
appears on video