Target Value Setting - Mitsubishi Electric AE-200A/AE-50A Instruction Book

5-3. Target Value Setting

This section explains how to set the target electric energy consumption values for the entire system for the
current year, each month, each day of the week, and each block. The set values will be displayed in the graph on
the Energy Use Status screen (see section 5-1) and the Ranking screen (see section 5-2).
Click [Energy Management] in the menu bar, and then click [Target Value Setting] to access the Target Value
Setting screen.
Under the [Total target value] section, the items [Annual target], [Monthly target], and [Usage ratio for each day of
the week] will appear. Set the annual target electric energy, usage ratio for each month, and usage ratio for each
day of the week to automatically calculate the monthly target electric energy.
Under the [Target value for each block] section, set the usage ratio for each block to automatically calculate the
annual target electric energy for each block.
Important: The target value settings must be made after all units have been started up.
The settings that have been saved while one or more units are starting up may be lost.
Annual target electric
energy
Comparison with previous
year
Monthly target electric
energy
Usage ratio for each
month
Usage ratio for each day
of the week
Refresh
Click to import the settings
from AE-200/AE-50.
Item
Annual target electric energy
Comparison with previous
year
Monthly target electric energy
WT07139X01
Enter the annual target electric energy consumption value.
Note: The value must be between 0 and 4294967 kWh.
Note: If the ratio is entered in the [Comparison with previous year] field, the annual
target electric energy will be calculated automatically, based on the electric energy
consumption data of the previous year.
Enter the ratio of the annual target electric energy of the current year to the electric energy
consumed in the previous year.
Note: The ratio must be between 0.0 and 999.9%.
Note: If the value is entered in the [Annual target electric energy] field, the ratio will be
calculated automatically based on the electric energy consumption data of the
previous year.
The target electric energy value for each month will appear.
Note: The values cannot be entered. The values will be calculated automatically, based on
the ratios entered in the [Usage ratio for each month] field.
35
Description
Block name
Annual target electric
energy for each block
Auto calc.
Usage ratio for each block
Save Settings
Click to save the changes
made.