Philips S9041/12 Manual page 31

4 Turn the retaining ring anticlockwise and lift it
2
1
5 Remove the shaving heads from the shaving
6 Clean the cutter and guard under the tap.
7 Shake off excess water.
8 Put the cutter back into the guard.
9 Place the shaving heads in the shaving head
10 Blue retaining ring: Place the retaining ring on
1
2
off the shaving head.
Repeat this process for the other retaining rings.
Place them aside in a safe place.
head holder. Each shaving head consists of a
cutter and guard.
Note: Do not clean more than one cutter and
guard at a time, since they are all matching sets.
If you accidentally put a cutter in the wrong
shaving guard, it may take several weeks before
optimal shaving performance is restored.
holder.
Note: Make sure the notches on both sides of
the shaving heads fit exactly onto the
projections in the shaving head holder.
the shaving head and turn it clockwise to
reattach the retaining ring.
31
English