Siemens SIPROCESS GA700 Compact Operating Instructions page 180

Connecting
5.2 Electrical connections
2. Fasten the prepared gland at the device:
⑥
⑦
Figure 5-11
– Fasten the Ethernet cable in the cable gland
Connecting the Ethernet cable
1. Isolate the free cable end.
2. Assemble the stripped cores in a FastConnect plug.
3. Insert the Ethernet plug into the service interface of the processing module. You must feel
for the position of the interface.
58
Plate with cable glands
Position cable gland Ethernet cable (underside of the device)
Ethernet cable: Position of the cable gland
⑦ ⑥
at the plate
Devices in explosion-proof design
Compact Operating Instructions, 11/2019, A5E35134047-04
.