Sony ClearScan25 SPP-AQ600 Operating Instructions Manual page 44

Troubleshooting
If you've experienced any of the following difficulties while using
your phone, use this troubleshooting to help you remedy the problem.
Should any problem persist, consult your nearest Sony dealer.
Symptom
Remedy
You hear five short error
• Make sure you set up the base phone correctly (page
beeps when you press
9).
( TALK ).
• Move the handset closer to the base phone.
• Replace the handset to the base phone for a while to
recharge the battery pack.
You hear no dial tone. • Make sure the telephone line cord is securely
connected to the telephone outlet.
• Make sure the battery is fully charged (page 12).
The telephone always
• Make sure the dialing mode is set correctly (page
connects with the wrong 10).
number or doesn't connect
fZ
W
at all. even though the
Ut
c
number you dial is correct.
(Z
The phone doesn't redial
• Make sure the number you last dialed (including the
1
correctly. tone and pause digits, if used) is fewer than ,32
digits.
• Make sure the last dialed number is really the one
you want to dial.
You hear interference
• Move the handset closer to the base phone.
during conversation.
• Press ( CHANNEL ) for a channel that sives better
reception.
• Place the base phone away from noise sources (page
8).
You hear a beep every three
• The battery is weak. Charge the battery for more
seconds.
than 12 hours (page 12).
44
^"/
Additional Information