Philips 5000 Series User Manual page 21

The dual PC setup should look like this:
PC1: You can use a
direction upstream and a HDMI
cable or a DP cable and connect it
to the USB up
for viewing video and audio
content.
PC2: You can use a
cable in direction upstream and
a HDMI cable or a DP cable and
connect it to the
the monitor for viewing video and
audio content.
For your convenience. Please use the
table below as reference.
Source
HDMI or DP
DP or HDMI
2. Connect each PC to the downstream
end of the USB-C1 cable.
1
OR OR
USB A-B Cable
PC1
2
3. Go to the On-Screen Display
(OSD) menu and follow the same
procedure with the KVM feature as
#2 in the previous section.
USB-A/B cable in
port on the monitor
USB-C/A or USB-C/C
USB-C1 port on
USB Upstream
USB UP
USB C1
OR OR
USB C-C or USB C-A Cable
PC2
Note
• Please note that the connection of
the input source is not automatic
and it is necessary to go to the
On-Screen Display (OSD) to select
the input you are using.
• You can also ads Multiclient
Integrated KVM feature in Picture-
by-Picture (PBP) mode. When you
enable PBP, you are able to view
two different sources projected onto
the same screen. The MultiClient
Integrated KVM feature enhances
productivity by using one screen to
control two PCs via the On-Screen
Display (OSD) menu setting.
1
19