Table of Contents
Advertisement
larclolctai amar-lol=rxeleh am ai -relelceliare|
2
=
re)
He (eae cscicp
1
Fade-in recording
1
Press the @ REC button at the starting point of
recording.
The deck enters the record-pause mode.
Ls)
Press the FADER button at the point where you
want to start fading in.
The |_""a) indicator flashes, and the sound fades in.
To return to the original volume level, immediately
during a fade-in recording, press the @ REC button.
Fade-out recording
Press the FADER button at the point where you want to
start fading out.
The l=" Jindicator flashes, and the sound being recorded
fades out.
A countdown starts, and the deck enters the record-pause
mode after the 0.0s indicator appears.
To enter the record-pause mode immediately during a
fade-out recording
Press the §€ PAUSE button.
To designate a desired duration of fade-in/fade-out
You can designate a desired duration of fade-in/fade-
out, from 1.0 seconds to 15 seconds. Fade-in/fade-out is
performed in 5 seconds unless you designate a different
duration.
If you turn off the unit after designating the desired
duration of fade-in/fade-out, the duration remains
memorized.
1
Choose either
""«:or =" I by pressing the
FADER button in the stop mode.
2
Designate a desired duration by pressing
<4 or >>.
Each time pressing <4 or BP , a duration in the
display changes as follows:
from 1.0 sec. to 3.0 sec.: in 0.2 sec. intervals
from 3.0 sec. to 5.0 sec.: in 0.4 sec. intervals
from 5.0 sec. to 15 sec.: in 1 sec. intervals.
(1B)
7 erolal colar
4cxomat-reie)aeliare|
If a Sony compact disc player with a remote commander is
available, you can start playback of the CD player and the
recording of the DAT deck simultaneously, with the remote
commander of the DAT deck.
Position the remote commander so that the signal reaches
the remote sensor of both the DAT deck and the CD player.
To start recording
This function can be performed only with the remote
commander.
1
Insert a cassette.
2
Insert the disc in the CD player.
3 press the CD SYNCHRO STANDBY button on the
remote commander of the DAT deck.
The deck enters the record-pause mode.
4
Press the CD SYNCHRO START button on the
remote commander of the DAT deck.
Recording on the DAT deck starts, and about 1
second later, playback of the CD player starts.
To stop recording
Press the CD SYNCHRO STOP button on the remote
commander of the DAT deck.
Notes
¢ To momentarily stop recording of the DAT deck and
playback of the CD player simultaneously, press the
§8 PAUSE buttons on both the DAT deck and the CD
player.
¢ If your CD player has a fast start up time, it may begin
playing before recording starts on the deck. To prevent
this, skip step 4, and press B> or IB PAUSE on the DAT
deck in step 4, then the play button on the CD player 2 or
3 seconds later.
To control the CD player with the remote commander of
the DAT deck
The following operations are possible:
Playback: Press the 18 button twice.
Pause: Press the §8 button once.
AMS: Press the k@<@ or DPI
button.
When a desired selection is
located using the above operation,
you can start CD synchronized
recording.
CD operating buttons
Advertisement
Table of Contents
