Table of Contents
Advertisement
Repacking
Disconnect unit from power supply
1
Place safety
strap over scissor arm
as shown.
CAUTION!
Failure to follow
this
Procedure may cause injury, and/or
damage to the scissor arm (the arm
is spring loaded).
Loosen
locking
ring,
disconnect
multi pin connector,
disengage scis-
sor arm
assembly
from coupling as
shown, place protective sleeve (23)
over multi pin connector (11),route
greenfield tubing tighten strap (9).
Remove
all
other
components.
Fold support bars (4) and
(5), se-
cure with bracket (3) in the direc-
tion of arrow.
Store
leveling
brackets
(20)
as
shown and secure.
し Fig.84
CAUTION
Advertisement
Table of Contents
