Advertisement
How to Operate
Before Powering ON for the first time, please charge fully for good battery life.
Charging
1. Plug the small end of the USB cable into the micro-USB connector port on
the headphone.
2. Plug the other end into a USB wall charger/computer/power bank that is
powered on.
Powering On
Long press
button for more than 3 seconds to power on.
Pairing Via Bluetooth
Connecting any Bluetooth device
1. On powering on, the headphone is in Bluetooth pairing mode automatically.
2. Open the Bluetooth settings on any Bluetooth device and search for device
with name "Trueno U10" and connect.
Note:
1. "Trueno U10 ANC Bluetooth Headphones" will automatically re-pair with the
last paired device whenever it is within range.
2. Devices with older Bluetooth versions may prompt you to input a passcode
key. Please enter "0000" on your device and press OK to successfully connect
with "Trueno U10 ANC Bluetooth Headphones"
Voice Assistant
This product is compatible with Siri/Google Assistant.
3.5mm Aux Cable Operation
Insert the 3.5mm AUX cable into the AUX input. "Trueno U10 ANC Bluetooth
Headphones"is ready to play audio/music through AUX mode.
04
Precautions For Use
• Do NOT use at high volume for any extended period to avoid hearing
damage.
• Do NOT use while driving for phone calls or any other purpose.
• Do NOT use if there is any loud unusual noise. If this happens, please contact
us at support@honeywellconnection.com .
• This product contains small parts which may be a choking hazard. Not
suitable for children under the age of 3.
• This product contains magnetic material. Consult your physician before
using the product in case you have a medical implant of any type.
• Do NOT attempt to disassemble this product as this may lead to a hazard and
will void the warranty.
• Use this product only with the power supply provided along with this product
(applicable for selected models only).
•
Do NOT use this product near any form of excessive heat such as gas
appliances and heating appliances.
Troubleshooting
Problem
Solution
• Charge the battery.
No Power
• Connect to the power source.
• Restart the product and try pairing again.
Unsuccessful Bluetooth
• Disable Bluetooth mode in your device and
pairing
then re-enable it.
• Make sure the product is in the Bluetooth
Poor audio quality
range.
• Increase the volume on "Trueno U10 ANC
Low or no volume
Bluetooth Headphones" and/or connected
device.
• The product may be paired to a different
device, disconnect from the paired device.
Undiscoverable in
•
Trueno U10 ANC Bluetooth Headphones"
Bluetooth pairing
not in Bluetooth mode, change to Bluetooth
mode.
is
05
Advertisement
