Parts Identification - Panasonic ES4033 Operating Instructions Manual

Before use
This WetDry shaver can be used for
wet shaving with shaving lather or for
dry shaving. You can use this
walertight shaver in the shower and
clean it in water. Treat yourself to wet
lather shaves lor al least three
weeks and notice the difference.
Your Panasonic Wet/Dry shaver
requires a little time to get used to
because your skin and beard need
about a month to adjust to any new
shaving method.Charge the shaver
for at least 8 hours before using it for
the first time or when it has not been
in use for more than six
months. (ES4033 need 16 hours)
Parts identification
(See fig. 1)
№ Protective cap
E Outer foil
© Outer foll release buttons
D Foil frame
El Inner blade
(E) Foil frame release button
(3 Switch lock button
Н On/Off switch
(D Charge status lamp
(b Trimmer
Қ) Trimmer switch
(p Charging adapter
Char ing and cordless
shav ng
(See fig. 2)
Connect Ше power cord to the
shaverand plug the power cord to
an AC outlet.
The charge status lamp will glow
when the shaver is being charged.li
will flash when the charging is
completed(ES4033 will stay glow
until it removed from the AC outlet).
You can fully charge the shaver in 1
hour if it seems to be losing
spaed(ES4033 need B hours).
Before traveling, charge it fully for 1
hour if you will not be taking the
charging adapter with you(ES4033
need 8 hours).
Cord shaving
Connect the shaver to the power
cord and plug the adaptor to the AC
outlet, then turn the shaver on.
If the shaver does not run, charge il
for approx.1 minute.
For a better shave
Put à thin layer of shaving foam on
your face which works as lubricator.
Shaving foam is the most suitable
among many others shaving aids
(gal, soap, cream, etc.). Do not put a
thick layer of shaving foam as it may
affect shaver's performance. И the
shaving head is clogged with foam,
simply rinse it under running water.
Depress Ihe switch lock button and
slide the On/Off switch upward to
tum the shaver on. Hold the shaver
at a right angle (80 ) to your skin
(see fig.3). Start out shaving by
applying gentle pressure to your face.
Stretch your skin with your free hand
and move the shaver back and forth
in the direction of your beard. You
may gently increase the amount of
pressure as your shin becomas
accustomed to this shaver. Applying
excessive pressure does nol provide
a closer shave.