Table of Contents
Advertisement
Available languages
Available languages
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
WARNING: To reduce the risk of injury, read the
instruction manual.
Intended Use
The DWST82822 and DWST82824 are designed for
professional applications.
DO nOT let children come into contact with this system.
Supervision is required when inexperienced operators use
this system.
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert
symbols and words to alert you to hazardous situations and
your risk of personal injury or property damage.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
(Used without word) Indicates a safety related message.
SAFETY WARNINGS AND CAUTIONS
WARNING: DO NOT alter or modify these D
products from their original design or function
without approval from D
or property damage can result from un‑authorized
modifications.
WARNING: D
WALT power tool holster shelf and
e
cabinet are intended to be used in temperatures of
14°F (-10°C) to 100°F (38°C).
WARNING: D
WALT power tool holster shelf and
e
cabinet is for indoor use only. Keep out of direct
sunlight.
Read and follow all safety warnings and installation
instructions before installation of this D
to follow warnings and instructions, which include exceeding
the stated load ratings on D
may cause product or property damage.
1 . D
WALT metal rail is rated up to 100 lbs. per foot
e
evenly spaced depending on the mounting surface
and attachment method. If this limit is exceeded,
the product may fail, cause personal injury, or damage
product or property.
2 . DO NOT mount this product on a truck bed or any
other mobile object.
3 . DO NOT exceed the maximum weight capacity.
WALT. Personal injury and
e
WALT product. Failure
e
WALT metal rail and accessories,
e
4 . This product should be empty when transporting.
5 . DO NOT exceed maximum product weight, including
contents. See Capcities for more information.
6 . As with all metal products, this product can contain
burrs and sharp edges. Wear protective gloves
during assembly.
7 . Follow mounting instructions appropriate for the
type of wall surface. Failure to do so will reduce the
D
WALT power tool holster shelf or cabinet load rating
e
capacity and may cause the product to fail, causing
personal injury, or damaging product or property.
8 . When hanging Dewalt accessories on D
metal rail, make sure the latching mechanism on
the bracket of the accessory is completely engaged
before placing any type of load on the accessory.
SAVE ALL WARNINGS AND INSTRUCTIONS
Additional Safety Information
WARNING: Never modify this product. Damage or
personal injury could result.
WARNING: ALWAYS use safety glasses. Everyday
eyeglasses are NOT safety glasses. Also use face or
dust mask if cutting operation is dusty. ALWAYS WEAR
CERTIFIED SAFETY EQUIPMENT:
•
ANSI Z87.1 eye protection (CAN/CSA Z94.3),
•
ANSI S12.6 (S3.19) hearing protection,
•
NIOSH/OSHA/MSHA respiratory protection.
WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction activities
contains chemicals known to the State of California to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
WALT
e
•
lead from lead‑based paints,
•
crystalline silica from bricks and cement and other
masonry products, and
•
arsenic and chromium from
chemically‑treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter
out microscopic particles.
•
Wear protective clothing and wash exposed areas
with soap and water. Allowing dust to get into your
mouth, eyes, or lay on the skin may promote absorption of
harmful chemicals. Direct particles away from face and body.
Use the appropriate dust extractor vacuum to remove
•
the vast majority of static and airborne dust. Failure
to remove static and airborne dust could contaminate the
working environment or pose an increased health risk to
the operator and those in close proximity.
FOR FUTURE REFERENCE.
English
WALT
e
5
Advertisement
Table of Contents
