Advertisement
LOCATION OF CONTROLS AND COMPONENTS
CONTROLS
@ Cassette Holder
@ Volume/Voice Activation
Level Control
@ Recording
Indicator/
Battery Check
® Record Button
© Cue/Fast Forward/
Review/Rewind
Switch
© Play Button
@ Stop/Eject Button
Built-in Speaker
@ VOICE ACTIVATED RECORDING
What is voice activated recording?
running automatically about 4 seconds later.
Note:
° The recording level is automatically adjusted regardless of the position of the Volume/Voice Activated
Level Control.
Set the Voice Activation Switch
to "ON".
VAS
vas
——{OFF}—
Pause
t
)
|
1
1
|
|
|
I
\
!
When conferences or conversation is recorded using the voice-activated recording function, only the
sound is recorded automatically so there is no tape waste.
When
the Voice Activation
Switch
is set to 'ON', the tape runs when
voice is picked up by the
microphone (Built-in Microphone, External Microphone) and when no voice is picked up, the tape stops
Adjust
the
voice
activation
level using the Volume/Voice
Activation Level Control.
© Voice Activation/Pause Switch
«0) Tape Counter and Reset Button
@) Built-in Microphone
42) Microphone Jack
43) Monitor Jack
A
[Tiga]
44) Tape-speed Selector
45) External Power Supply
Input Jack
[DC IN 3 V]
MES
é6—) Battery Compartment
Fig. 1
The lighting of the Recording Indica-
tor/Battery
Check
Lamp _ indicates
that the tape is running and recording
is being made.
Illuminated
'
"i
a4
REC/BATT
Voice activation level adjustment
The Volume/Voice Activation Level Control
To
record loud sounds only, rotate the control
is normally set to the 4~7 position.
toward
"1~3"; to record soft sounds too,
rotate toward "8~10).
No sound is record-
ed at the "0" position.
Advertisement
