Table of Contents
Advertisement
Recording
a picture
To adjust the brightness
of the LCD screen, press either of the two buttons on LCD
BRIGHT.
The LCD panel moves about 90 degrees
to the viewfinder
side and about 210 degrees
to
the lens side,
If you turn the LCD panel over so that it faces the other way, the Q indicator
appears
in the viewfinder
(Mirror
mode).
to brighten
to dim
When closing
the LCD panel, set it vertically
until it clicks, and swing
it into the
camcorder
body.
Note
When nsmg the LCD screen except in the mirror
mode, the viewfinder
automatically
turns off.
When you use the LCD screen outdoors in direct sunlight
The LCD screen may be difficult to see. If this happens, we recommend
that you use the
view finder.
Picture in the mirror mode
The picture on the LCD is a mirror-image.
However,
the picture will be normal
when
recorded
During recording
in the mirror mode
While recording in the mirror mode, you cannot operate
the following
buttons: MENU,
TITLE, DATE, and TIME on your camcorder.
Indicators
in the mirror mode
• The STBY indicator
appears as 110 and REC as @ Some of the other indicators
appear mirror-reve_rsed
and others
are not displayed
• The date appears
mirror-reversed
when the auto date function is working
However,
the date will be normal
when recorded
(1) Turn STANDBY
down
to LOCK,
(2) Close the LCD panel.
(3) Eject the cassette.
(4) Set the POWER
switch
to OFF.
After use your camcorder
Remove the battery
pack from your cam_order
to avoid turning
on the built in light
14
Advertisement
Table of Contents
