Advertisement
Part 4: Maintenance and Cleaning
• When the hairdryer is not used and before cleaning turn off and unplugged the product and leave for cooling.
• Do not ever wash your hairdryer. Clean the outcover with a soft, damp piece of cloth. Do not use substances which may
damage the product.
• Clean the rear filter after a while of use. Rear filter is fixed to the body with a special sliding bar system. Pull back the
lock finger at the bottom of the rear filter cover and take out the rear filter cover and then the filter. Clean the dirt on the
filter and filter cover with water. Take out hairs. Before assembling to the body again make sure that it is completely dry.
Do not ever run the hairdryer without drying the filter and filter cover. Place the filter to its housing. Place the filter slot to
filter slot housing on the top of the rear filter cover. Push in the filter lock at the bottom of the rear filter cover and put on
the cover. (Figure 7)
• Do not use your hairdryer close to the bath tube, basin or any other vessel with water.
Maintenance
Switch off the product after use. Unplug and leave for cooling.
Your product has a special desinged hanging loop appropriate
maintenance (Figure 1 / Part No.7)
Figure 7
9
Advertisement
