Table of Contents
Advertisement
Playback procedure
Press OPEN/CLOSE
on
the unit or the remote con-
trol.
The disc tray will open.
Place a disc onto the tray.
Position it with the printed
label side up, align it with
the guides, and place it in
its proper position.
3
Press OPEN/CLOSE
or
PLAY.
The disc tray closes auto-
matically.
On the TV-screen,
,,A,,
changes to "_"
and then
playback commences.
• A menu screen will
appear on the TV screen,
if the disc has a menu
feature.
4
NOTES:
• If a non-compatible disc is loaded, "incor-
rect Disc", "Region Code Error" or "Paren-
tal Error" will appear on the TV screen ac-
cording to the type of loaded disc. If these
appear, check your disc again (see pages
25 and 38).
• Some discs may take a minute or so to
start playback.
• When you set a single-faced disc label
downwards (ie. the wrong way up) and
pressPLAY or OPEN/CLOSE on the unit,
'@"
will appear on the display for about
5 seconds and then "No Disc" or "Incor-
rect Disc" will be displayed.
• Some playback operations of DVDs may
be intentionally fixed by software produc-
ers. Since this unit plays DVDs according
to the disc contents the software produc-
ers designed, some playback features
may not be available. Also refer to the in-
structions supplied with the DVDs.
4
5
6
7
Press A/V
or • / ,to
make a selection.
Press SELECT.
• Title is selected and play commences.
Press STOP to end playback.
• The unit memorizes the stopped point, depending on the
disc. "IU" appears on the screen. Press PLAY to resume
playback (from the scene point).
• If you press STOP again or unload the disc ("m" appears
on the screen.), the unit will clear the stopped point.
To stop the playback, press STOP.
Then press OPEN/CLOSE.
The disc tray opens.
Remove the disc and then press POWER.
The disc tray closes automatically and unit turns off.
27
Advertisement
Table of Contents
