Sony DVP-NC675P Operating Instructions Manual page 68

FRAME The pictm'e, including subjects
that do not mnve dynanficallv,
]is output in high resnluti(m.
• TRACK SELECTION ( DVDVIDEO only)
Gives he sound track which contains tile
highest number of channels priority when you
play a DVD VIDEO on which multiple audio
lkwmats (PCM, DTS, or Dolby Digital
lormat) are recorded.
O_FF 1No prinrily given.
AUTO
/ Prinrity given.
Settingsfor the Sound
(AUDIO SETUP)
"AUDIO SETUP" allows you to set the sound
according to the playback and connection
conditions.
Select "AUDIO SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 64).
The default settings are underlined.
• When you set the item to "AUTO," the hmguage
may change. The "TRACK SELECTION" setting
has higher priority than the "AUDIO" settings in
"LANGUAGE SETUP" (page 65).
• If you set "DTS" to "OFF" (page 69L the DTS
sound track is not played even if you set "TRACK
SELECTION" to "AUTO."
• If PCM, DTS, and Dolby Digital sound tracks
have Ihe same number of channels, the phLver
selects PCM, DTS, and Dolby Digital sound
tracks in this order.
MULTI-DISCRESUME(DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off. Resume playback point can be stored in
memory liar up to 6 different DVD VIDEO/
VIDEO CD discs (page 31).
ON
Stores the resume settings in
memory for up to six discs.
OFF
Does not store the resume
settings ill memory. Playback
restarts at the resume point only
lk_rthe current disc ill the player.
AUDIO ATT (attenuation)
If tile playback sound is distorted, set this
item to "ON." The player reduces the audio
output level.
This function af'li:cts the output of the LINE
OUT L/R (AUDIO)jack.
OFF Normally, select this position.
ON Select this when the playback sound
from the speakers is distorted.
4,AUDIO DRC(DynamicRangeControl)
(DVDVIDEO/DVD-RW only)
Makes the sound clear when the _olume is
turned down when playing a DVD that
conforms to "AUDIO DRC." This affects the
output from the IMlowing jacks:
- LINE OUT L/R (AUDIO) jack
DIGITAL OUT (COAXIAL or OPTICAL)
jack only when "DOLBY DIGITAL" is set
to "D-PCM" (page 69).
STANDARD Normally select this position.
TV MODE Makes the low sounds clear
even if you turn the volume
down.
WIDE
Gives you the feeling of being
RANGE at a live perfnrnmnce.
68