Advertisement
Quick Links
SONY
Stereo Turntable System
PS-LX120D
Operating Instructions
| WARNING |
To prevent fire or shock hazard, do not ex-
pose the unit to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK
00 NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol
is intended
to alert
the
user
to the presence
of uninsulated
"dangerous
voltage" within the prod-
uct''s enclosure that may be of suffi-
cient magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert the
user
to
the
presence
of
important
operating and maintenance (servicing)
instructions in the literature accompa-
nying the appliance.
* The graphical symbols are on the bottom enclosure.
©
1991 by Sony Corporation
3-753-171-21(1)
Owner's Record
The model and serial numbers are located at the rear.
Record these numbers in the spaces provided below. Refer
to them whenever you call upon your Sony dealer regarding
this product.
Model No. PS-LX120D
Serial No.
Precautions
On safety
« Operate the unit only on 120V AC, 60 Hz.
« Should any solid object or liquid fall into the cabinet unplug
the unit and have it checked by qualified personnel before
Operating it any further.
e Unplug the unit from the wall outlet if it is not to be used for
an extended period of time. To disconnect the cord, pull it
out by the plug. Never pull the cord itself.
On installation
« Place the turntable on a level surface.
« Avoid placing the unit near electrical appliances (such as a
television, hair dryer, or fluorescent lamp) which may cause
hum or noise.
e Place the turntable where it will not be subject to any
vibration, such as from speakers, slamming of doors, etc.
« Keep the unit away from direct sunlight, extremes of
temperature, and excessive dust and moisture.
On repacking
Do not throw away the carton and packing materials. It is an
ideal container in when transporting the unit for repair work,
etc.
On cleaning
e Before playing a record, clean the stylus with a soft brush.
Brush the stylus from back to front. Never attempt to clean
the stylus with your finger tip. If a fluid stylus cleaner is
used, make sure not to moisten the stylus too much.
« Clean the cabinet periodically with a soft dry cloth. if the
stains are difficult to remove, use a cloth moistened with a
mild detergent solution. Do not use solvents such as
alcohol, benzine or thinner, since they will damage the
finish.
For the customers in the U.S.A.
For detailed precautions, see the leaflet "IMPORTANT
SAFEGUARDS".
Advertisement
