2 Disassembly and Assembly Instructions
To Remove Flow Sensor, Plug and Valve Body
2.1
2. Detach the Flow Sensor
lead wire.
3. Turn the Valve Body
2.2 To Remove Bottle Complete
2. Remove Valve Body.
3. Disconnect 2 pipes co nnection.
4. Remove 3 screws from bra cket.
1. Turn the Plug anti-clockwise
then remove.
anti-clockwise then
remove.
1. Disconnect the connector CN-OLP1 from the
Electronic Controller and detached the lead wire
HT1-L2 (Orange) and AC2-L3 (Black).
3