Table of Contents
Advertisement
Watching Video Programs
Watching Video Programs
When you watch video programs on your TV, VCR or LD
player, we recommend that you play the audio portion of the
video through the receiver (instead of your TV's speakers),
so that you can take advantage of sound field programs,
including Dolby surround sound. In this case, set the
speaker volume of TV to the minimum level.
To watch TV programs, turn on both TV and the receiver
and select TV with the FUNCTION knob on the receiver. To
watch videos or laser discs, use the following procedure if
you've hooked up your components as described in
"Connecting Video Components" on page 8. See your TV,
VCR, LD ptayer's instruction manual if you need help.
to AUDIO/VIDEO
OUT
1 Rotate the FUNCTION knob to select the
video program source you want.
2
Turn on the TV and set the video input to
your video component.
3
Turn on the component you are going to use
(VCR or LD player), and then start playback.
If you use a Sony TV
The TV turns on automatically when you press one of the
SYSTEM CONTROL/FUNCTION
buttons on the remote.
Moreover, you can use convenient functions of the remote to
watch a video program source on a Sony TV. See page 13.
Combining a Video Image with the Sound
from Another Program Source
You can combine a video image with sound from another
program source (including video sources).
For example, you can watch a video taped program (without
original sound) while listening a to CD.
1
Rotate the FUNCTION knob or press TAPE to
select the audio you want.
{-—————.
2
Press FUNCTION MODE.
The selected audio is fixed and "VISUAL MODE"
appears on the display. In this mode, you can
select only the video source without its original
sound.
3
Rotate the FUNCTION knob to select the
video you want.
If you want to change the audio selected in step 1,
press FUNCTION MODE.
"AUDIO MODE"
appears on the display.
In this mode, you can
select any audio of the sources (including video
sources).
4
Play back both program sources you
selected.
Note on the FUNCTION MODE button
If vou do not select the video or audio within 8 seconds after
pressing the FUNCTION
MODE button, the VISUAL MODE
or AUDIO MODE is canceled and you cannot fix the video
or audio.
In this case, press the FUNCTION
MODE
button
until the mode that you want appears on the display. Each
time you press the button, the mode changes as follows:
VISUAL MODE = AUDIO MODE => off.
19
Advertisement
Table of Contents
