Page 1
SN55ES08CE Dishwasher EN Instructions for use Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
Translated from German to English - www.onlinedoctranslator.com Further information and explanations can be found online: Table of contents 1 Security ........4 8 Equipment ........ 23 1.1 General information ....4 8.1 Upper dish rack ....24 1.2 Intended 8.2 Cake stand ........24 use ...........
Page 3
20 Customer service ......57 13.2 Putting away the dishes....34 20.1 Product number (E-No.), 13.3 Clearing out the dishes....35 production number (FD) 14 Basic operation..35 and counting number (Z-No.)..57 20.2 AQUA-STOP guarantee.... 57 14.1 Switching on the device ....35 14.2 Setting the program .....
Security 1 Security Please note the following safety instructions. 1.1 General information ¡Read these instructions carefully. ¡Save the instructions and product information later use or subsequent ownership. ¡Do not connect the device if it is damaged during transport. 1.2 Intended use Use the device only: ¡to wash household dishes.
Page 5
Security WARNING - Risk of electric shock! Improper installations are dangerous. ▶ Only connect and operate the device in accordance with the information on the nameplate. ▶ Always use the power cable supplied with the new device. ▶ Only connect the device to an alternating current power supply via a properly installed earthed socket.
Security Contact between the device and installation cables can lead to a defect in the installation cables, e.g. E.g., gas pipes and power lines. Gas from a corroded gas line can ignite. A damaged power line can lead to a short circuit. ▶...
Page 7
Security Strongly caustic-alkaline or highly acidic cleaning agents in conjunction with aluminum parts in the washing compartment of the device can lead to explosions. ▶ Never use highly caustic-alkaline or highly acidic cleaning agents, especially from the commercial or industrial sector, in conjunction with aluminum parts (e.g.
Security ▶ Never bend, squeeze or change the power cable. 1.6 Damaged device WARNING - Risk of electric shock! A damaged device or a damaged power cable is dangerous. ▶ Never operate a damaged device. ▶ Never operate a device with a cracked or broken surface. ▶...
Page 9
Security Children can inhale or swallow small parts and thereby suffocate. ▶ Keep small parts away from children. ▶ Do not let children play with small parts. Children can become trapped in the device and suffocate. ▶ If available, use parental controls. ▶...
avoid Contact between the device and avoid 2 property damage water pipes may cause corrosion of avoid the water pipe and the water pipe may leak. Make sure there is at least 5 cm ▶ avoid 2.1 Safe Installation distance between the device and the water pipe.
Environmental protection and saving Special salt for dishwashers can 3.2 Save energy damage the washing container If you follow these instructions, your through corrosion. device will use less electricity and ▶ To ensure that overflowed special water. salt is rinsed out of the rinsing container, fill the special salt into the Use the Eco 50°...
Setting up and connecting Sensor level Description 4 Set up and SE:01 Does the program Connect strength even with small amounts of dirt To ensure proper operation, connect conditions for the device to electricity and water effective elimination properly. Please note the required leftover food.
Setting up and connecting adjacent worktop, which is firmly 4.4 Drinking water connection connected to the neighboring Connect your device to a drinking cupboards. water connection. Follow the safety instructions. → page 4 Install drinking water connection Follow the instructions for electrical Hints connection.
Page 14
Setting up and connecting Plug the power plug of the device's power cord into a socket near the device. The connection data of the device is on the nameplate. Check that the power plug is firmly seated.
Get to know 5 Getting to know each other 5.1 Device Here you will find an overview of the components of your device. type label Type plate with E number and FD number → Page 57 . You need the data for customer service → Page 57 .
Page 16
Get to know Fill the cleaner chamber with cleaner. Cleaner chamber → "Cleaner", page 30 Lower dish rack → Page 25 Lower dish rack Fill the special salt storage container with Storage container for special special salt. salt → "Softening system", page 26 Lower spray arm The lower spray arm cleans the dishes in the lower basket.
Get to know 5.2 Controls You can use the control panel to set all of your device's functions and receive information about its operating status. Some buttons allow you to perform various functions. 3 4 5 6 11 10 Switch on device → Page 35 Switch ON/OFF button and reset off device →...
Page 18
Get to know Start program → Page 36 Start button If you approx. 3 seconds button Press to open the basic settings. → ""Change basic settings", page → "Remote Start", page 44 Remote start Set time delay → Page 36 Change Time delay and setting buttons basic settings Open the device door.
Page 19
Get to know symbol Description If you have activated the time delay, the symbol lights up in the display. → "Setting the time delay", page 36 When you have started a program, the symbol lights up in the display. If you have activated the key lock, the symbol lights up in the display.
programs 6 programs Here you will find an overview of the If the rinse aid system is switched on or if adjustable programs. Depending on there is a lack of rinse aid, the running time the device configuration, various changes. programs are available, which you You can find the consumption values can find on the control panel of your...
programs program Program Sequence Dishes: Particularly gentle: ¡delicate dishes, handling ¡Pre-rinse Glass 40° plugs, temperature-sensitive ¡Clean 40°C ¡ plastics, glasses and stemware Intermediate rinsing ¡Rinse 60 °C ¡dry Degree of pollution: ¡low-stick, fresh food leftovers Dishes: Time optimized: ¡mixed dishes and dishes ¡Clean 65°C ¡...
Page 22
programs For downloaded programs and in the delivery state, the program name is displayed in the app. The display alternately shows “AP:P” and the remaining time. Tip:You can use the Home Connect app to download additional programs and save them to the button.
Additional functions 7 additional functions Here you will find an overview of the additional functions that can be set. Depending on the device configuration, various additional functions are available, which you can find on the control panel of your device. Depending on the program, you can choose certain additional functions.
Furnishing Lower or raise the dish rack evenly 8.1 Upper dish rack to the appropriate level. Place cups, glasses and small dishes in the top rack. Make sure the dish rack is at the same height on both sides. To create space for larger dishes, you Release the levers.
Furnishing 8.3 Lower dish rack 8.4 Folding spines Put pots and plates in the lower dish Use the folding spikes to safely sort rack. dishes, e.g. B. Plates. You can place large plates up to a diameter of 31 cm in the lower dish To make it easier to organize pots, rack as shown.
Requirement:The device is set up and 8.5 Cutlery drawer connected. → page 12 Put cutlery in the cutlery drawer. Pour in special salt. → Page 27 Fill in rinse aid. → Page 29 Turn on a device. → Page 35 Set the softening system.
Softening system When using for the first time: Fill Only use up to a water hardness of the storage container completely 21 °dH without adding special salt. with water. ¡The water hardness level is 0 - A notice:Only use special salt for 6 °dH.
Rinse aid system Fill in the rinse aid up to the max Additional runtime in mark. minutes Additional water consumption in liters 0.05 Additional consumption of electricity in kWh The stated consumption values are laboratory measurements according to the currently valid standard and determined using the Eco 50°...
cleanser – A higher level adds more rinse 12 cleaners aid to the rinse cycle, reduces water stains and produces a better drying result. 12.1 Suitable cleaners To save the settings, Only use cleaner that is suitable for Press for 3 seconds. dishwashers.
cleanser Add cial salt and rinse aid. For the Liquid cleaner best washing and drying results, we Liquid cleaners work faster and are recommend using special salt and recommended for shortened rinse aid for water hardness levels of programs without pre-rinsing. 14 °dH and above.
cleanser For results, we recommend using Pour cleaner into the dry cleaner special salt for water hardness chamber. levels of 14 °dH and above. 50ml ¡To avoid sticking, 25ml Only handle cleaners with a water- 15ml soluble coating with dry hands and only fill them into a dry cleaner chamber.
Dishes Close the cleaner chamber lid. 13.1 Damage to glass and dishes Only wash glasses and porcelain that are marked as dishwasher-safe by the manufacturer. Avoid damage to glass and dishes. Caused Recommendation Just rinse The following thing Dishes, that dishes are not dishwasher from manufacturer...
Dishes ¡For better washing results and Caused Recommendation To maintain drying results, place If you are strong Strong caustic alkaline parts with bulges and depressions ash or strong caustic alkaline at an angle to allow water to drain acidic rice or strongly acidic away.
service – Do not place any small parts in 4 basic operation the tab collecting tray and do not service block it with dishes so as not to block the lid of the detergent compartment. service 14.1 Switch on the device press.
service 14.6 Activate key lock Press the button for the ▶ appropriate additional function. → The key lock prevents the device "Additional functions", page 23 from being used undesirably or aThe additional function is set improperly during operation. and the additional function button flashes. 14.4 Setting the time delay ▶...
service aThe program is aborted and is completed after approx. 1 minute. 14.10 Switch off the device The instructions for safe use → Page 10 observe. press. Tip:If you press during the rinse cycle, the current program will be interrupted. When you turn on the device, the program continues automatically.
Basic settings 15 basic settings You can adjust the basic settings of your device to suit your needs. 15.1 Overview of the basic settings The basic settings depend on the features of your device. basic Description Display text Selection position H:04 H:00 - H:07 Adjust the softening system...
Page 39
Basic settings basic Description Display text Selection position Hot water A:00 A:00 - A:01 Set cold water connection or hot water connection. Set the device only for hot water, if the hot water is processed economically and a suitable installation is available, e.g. B. a solar system with a circulation line.
Page 40
Basic settings basic Description Display text Selection position SP:01 SP:00 - SP:01 Set predefined program Starter program when switching on the device. ¡When hiring "SP:00" is the last program selected when the device is switched on. set. ¡When hiring "SP:01" is the Eco 50° program preset when the device is switched on.
Page 41
Basic settings basic Description Display text Selection position o:02 o:00 - o:02 Automatic opening of the autoOpen Dry device door during Activate or deactivate the drying phase. If the function is activated, the running time may increase. The following settings are possible: ¡With the setting "o:00"...
Basic settings basic Description Display text Selection position → "Remote Start", page Remote start rc:01 rc:00 - rc:02 44 activate or deactivate. The following settings are possible: ¡With the setting "rc:00" the function is permanently deactivated. ¡With the setting "rc:01" The function can be selected using the button.
Home Connect 16.1 Home Connect quick start 6 Home Connect Connect T his device is network capable. Connect Connect your device to a mobile device Connect your device to a mobile device quickly and easily. to operate functions via the Home Connect app.
Home Connect Open the Home Connect app and 16.3 Data Protection scan the following QR code. Please note the information on data protection. When your device is connected to a home network connected to the Internet for the first time, your device transmits the following categories of data to the Home Connect Server...
B. due to food approved machine care and machine residues and lime. To avoid cleaner for dishwashers online at malfunctions and reduce odors, clean https://www.siemens- the device at regular intervals. home.bshgroup.com/store or via customer service. Machine care, in conjunction with...
Cleaning and care phase distance from cleanser placement food residues Machine cleaner Cleaner chamber and deposits For optimal cleaning performance, the Remove any coarse dirt in the program doses the cleaners separately interior with a damp cloth. in the corresponding cleaning phase. This requires the correct placement of Clean the sieves.
Page 47
Cleaning and care Press the locking lugs together and coarse sieve remove the coarse sieve upwards. Clean sieves Impurities from the rinse water can clog the sieves. After each rinse, check the sieves for residue. Turn the coarse sieve counterclockwise and remove the sieve system.
Cleaning and care Pull the lower spray arm upwards. 17.6 Clean spray arms Limescale and impurities from the rinse water can block the nozzles and bearings of the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull it downwards.
This way you avoid unnecessary costs. Tip:Further information and explanations for troubleshooting can be found online by scanning the QR code in the table of contents and on our website siemens-home.bsh-group.com. WARNING Danger of electric shock! Improper repairs are dangerous.
Page 50
Troubleshooting Cause and troubleshooting Disturbance E:32-00 lights up Take the strainer out of the inlet hose Change or display for water supply shines. Clean the sieve. Place the strainer in the inlet hose. Screw on the water connection. 8th. Check the water connection for leaks. Connect the power supply.
Page 51
Troubleshooting Cause and troubleshooting Disturbance E:61-03 lights up No device error. The siphon connection is still closed Change. Water will or the waste water hose is kinked or blocked. not pumped out. Check the connection on the siphon and open it if necessary.
Page 52
Troubleshooting Cause and troubleshooting Disturbance All LEDs light up Electronics have detected an error. or flashing. Press the main switch button for about 4 seconds. The device will reset and restart. If the problem occurs again: Turn off the device. ‒...
Page 53
Troubleshooting Cause and troubleshooting Disturbance Leftover food on dishes dishes. Sieves are inserted incorrectly and/or not locked. Insert the sieves correctly. → "Sieve system", page 46 Lock the sieves into place. Washing program selected that is too weak. Choose a stronger washing program. ▶...
Page 54
Troubleshooting Cause and troubleshooting Disturbance Removable streaks Place dishes in the upper dish rack so that the tab are located on glasses, drip tray is not blocked by dishes. glasses with a metallic → appearance ""Putting away the dishes", page 34 and cutlery.
Transport, storage and disposal Insert the pump cover and press 18.1 Clean the waste water 8th. down. pump Coarse food residue or foreign objects can block the wastewater pump. As soon as the flushing water no longer drains properly, you have to clean the waste water pump.
Transport, storage and disposal 19.2 Make the device frost- 19.4 Dispose of old device proof Valuable raw materials can be reused through environmentally If the device is in a room at risk of friendly disposal. frost, e.g. B. in a holiday home, empty the device completely.
Customer service 20.2 AQUA-STOP guarantee 20 Customer Service In addition to warranty claims against Functionally relevant original spare the seller from the purchase contract parts in accordance with the relevant and in addition to our manufacturer's Ecodesign Regulation are available guarantee, we provide replacement from our customer service for a under the following conditions.
Technical data 21 Technical data Weight Max.: 60kg Tension 220 - 240V, 50Hz or 60Hz 2000 - 2400 W Connection value validation 10 - 16 A ¡at least 50 kPa (0.5 bar) ¡ Water pressure max. 1000 kPa (10 bar) at least 10 l/min Inflow quantity Cold water.
Directive 2014/53/EU. You can find a detailed RED declaration of conformity online at BSH Hausgeräte GmbH hereby siemens-home.bsh-group.com on the declares that the device with Home product page of your device among Connect functionality is in accordance the additional documents.
Page 60
NL Geproduceerd door BSH Hausgeräte GmbH onder de handelsmerklicentie van Siemens AG BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY siemens-home.bsh-group.com *9001871129* 9001871129 (030531) 650 A1...