Table of Contents
Advertisement
YOU WILL SEE:
Each time Cool mode is selected, the ECO
feature will be activated by default. Press
ECO button to deactivate. When ECO feature
is deactivated, the fan remains On all of the
time with the compressor cycling on and o
when the desired room temperature is
reached.
Eco (ENERGY SAVER) FEATURE:
DO THIS:
PRESS Eco BUTTON TO
ACTIVATE/DEACTIVATE
YOU WILL SEE:
Each time Cool or Dry mode is selected Eco
feature will be activated as default. We
recommend leaving the Eco feature on to
help save energy and money. To switch out
of Eco mode, press the Eco button during
Cool or Dry mode.
In Eco mode, the fan will continue to run for 3
minutes after the compressor shuts o . The
fan then cycles on for 120 seconds at 10
minutes intervals until the room temperature
is above the set temperature, at which time
the compressor turns back on.
OPERATING INSTRUCTIONS
NOTE:
If the unit is shut o
mode, unit will start with the same mode and
target temperature as prior to standby. If
the mode was Cool or Dry, ECO will be
activated automatically when the appliance
turns on. If the unit is running in cool or dry
mode without Eco feature and a power
failure occurs, once the power is restored,
Eco feature will remain o .
TO ACTIVATE THE CHILD LOCK FEATURE:
MODE BUTTON FOR 3 SECONDS
YOU WILL SEE:
Pressing and holding the Mode button for 3
seconds will activate or deactivate the Lock
function. The control panel will be locked and
settings cannot be changed.
CHECK DUST FILTER FEATURE:
This feature is a reminder to clean the Dust Filter
(See Care and Cleaning). The Dust Filter light will
illuminate after 250 hours of operation. To reset
after cleaning the filter, hold the "Fan" button for
5 seconds.
during Cool or Dry
DO THIS:
PRESS AND HOLD THE
17
Advertisement
Table of Contents
