Sanyo DR201 Service Manual page 2

DISASSEMBLY INSTRUCTIONS
GENERAL REMARKS
Before disassembling the unit, spread a soft rubber mat or a
cloth on the work bench to avoid scratches and grease
stains.
Do not spread anything which is likely to cause static
electricity because transistors and ICs may be easily
damaged by it.
Amplifier P.C.Board
Reassemble the unit, noting the kinds of screws and the
soldering and arrangement of the leads. Refer to "Circuit
Diagram and Exploded Views" for correct assembly.
Before disassembling the unit, take out the cassette tape
and the batteries.
CABINET BOTTOM REMOVAL
1. Remove the four screws (1
-
4) fastening the Cabinet
Bottom.
~ e c h a n i s m Chassis
2 Detach the Cabinet Bottom by lifting it in the direction of the
arrow.
5. Reassemble in reverse order.
3. Reassemble in reverse order.
AMPLIFIER P.C.BOARD REMOVAL
1 . Detach the Cabinet Bottom by following the instructions for
it.
MECHANISM CHASSIS REMOVAL
1. Detach the Amplifier P.C.Board by following the instructions
for it.
2. Remove the screw (8) and detach the Mechanism Chassis
by lifting it from the Cabinet Top.
Mechanism Chassis
2. Unsolder the following leads from the Amplif ier P.C.Board.
Three leads (brown, pink and black) of the LED Indicator
*
Biue lead of the RIP Head
3. Remove the three Screws (5
-
7) fastening the Amplifier
3, Reassemble in reverse order.
P.C.Board and Lug.
4. Detach the Amplifier P.C.Board by lifting it in the direction of
the arrow.