Kenwood KR-896 Instruction Manual page 11

MUTE key
VOLUME
CONTROL
keys
INPUT key
m To mute the sound temporarily
(Press the MUTE key.
MUTE
Remote control unit
MUTING indicator blinks.
us
| * Pressing the key again resumes the previous volume.
m Listening through headphones
| 1 Insert the headphones plug into the
PHONES jack.
* Set the SPEAKERS switch to OFF. —
2 Adjust the volume.
VOLUME CONTROL
DOWN =f Be LIF
VOLUME CONTROL
a sa
Main unit Remote contro! unit
PHONES jack SPEAKERS key
INPUT SELECTOR
knob
m@ Ordinary tape recording
1 Select the source to be recorded.
INPUT SELECTOR
(CE) r 7 iat
2 Set the cassette deck to the record-
pause mode and start recording it on the
cassette deck.
Record-pause made
3 Play the source component to be
recorded.
Recording starts.
Note:
The input source cannot be changed over while the cassette
deck connected to this unit via the system control cord is in the
record mode. When it is required to change the input source,
put the cassette deck in the. stop mode beforehand.
SPEAKERS key
OFF: This position silences all speakers to permit private
use of headphones. (SPEAKER indicator goes off.}
ON : Activates the speakers connected to the
SPEAKERS A terminals on the rear panel.
(SPEAKER indicator lights on.}
SPEAKERS Speaker indicator
A ET
KR-596 KR-896/KR-796
KR-896/KR-796/KR-596 (En) 11