Download Print this page

D-Link DWR-M930 How Do

4g lte router

Download this manual

How do I reset the DWR-M930 4G LTE Router to factory

Here's how you perform a soft reset and a hard reset on the DWR-M930 Router, follow these

steps

Soft Reset

1. Connect your PC or smartphone to the DWR-M930 router either via Wi-Fi or using an

ethernet cable.

2. Access the router's web interface by entering its IP address into a web browser on the

address bar

http://192.168.0.1

3. Enter your admin username and password. Username: admin, Password: (as printed

on the device label at the bottom of the router)

4. Go to the 'Management' tab at the top of the page then 'System Settings' on the left-

hand side.

Technical Support Setup Procedure

default settings?

then press enter.

Page 1 Technical Support Setup Procedure How do I reset the DWR-M930 4G LTE Router to factory default settings? Here’s how you perform a soft reset and a hard reset on the DWR-M930 Router, follow these steps Soft Reset 1. Connect your PC or smartphone to the DWR-M930 router either via Wi-Fi or using an ethernet cable.
Page 2 Technical Support Setup Procedure 5. Click on Reset to initiate the soft reset process. 6. The Router will restart, and your settings will be back to the factory default settings. Hard Reset 1. Ensure the router is powered on. Press and hold the reset button on the back side of the router for about 10 seconds.