Table of Contents
Advertisement
DINION 7100i IR
–
Note: Latency mode is only usable with MPEG-ActiveX in Internet Explorer. This browser is no
longer supported.
Video buffer
The value shown is calculated from the Latency mode setting. It cannot be changed.
JPEG resolution
Specify the size of the JPEG image on the Live page. The options are Small, Medium, Large
(720p), Maximum, and Resource based (default).
Note: Resource based will apply the best resolution possible based on the available
resources.
JPEG interval
You can specify the interval at which the individual images should be generated for the M-
JPEG image on the Live page.
Enter a time interval (in milliseconds). The default is 0.
JPEG quality
You can specify the quality at which the JPEG images appear on the Live page.
This option is only available if JPEG resolution is not set to Resource based.
Click Set to apply the changes.
4.2.2
'Live' functions
You can adapt the Live page functions to meet your requirements. Choose from a variety of
different options for displaying information and controls.
1.
2.
Transmit audio
When selected, the audio from the camera (if set to On on the Audio page) is sent to the
computer. This setting applies only to the computer on which the selection is made.
Transmitting audio data requires additional network bandwidth.
Auto logout time [min]
Set a time frame (in minutes) for the automatic logout. Default value is 0 (no automatic
logout).
Show alarm inputs
The alarm inputs are displayed next to the video image as icons along with their assigned
names. If an alarm is active, the corresponding icon changes color.
Show alarm outputs
Alarm outputs are shown next to the video image as icons along with their assigned names. If
an output is switched, the icon changes color.
Allow snapshots
Specify whether the icon for saving individual images should be displayed below the live
image. Individual images can only be saved if this icon is visible.
Allow local recording
Specify whether the icon for saving video sequences locally should be displayed below the live
image. Video sequences can only be saved locally on your hard disk if this icon is visible.
Bosch Security Systems B.V.
No buffering: Shows video as it is received by the decoder with minimum latency. Allows
the video to jerk if there is network jitter.
Select the check boxes for the functions to be displayed on the Live page. The selected
elements are checked.
Check to see if the desired items are shown.
User manual
Configuration | en
2023-06 | V02 | F.01U.390.686
17
Advertisement
Table of Contents
