Sync; (6.1) Int Screen.36; (6.2) Changing Ext Setting.36 - Toshiba IK-TU51CU Instruction Manual

(6) SYNC
When an external sync signal is input, the display changes from INT (internal sync) to EXT (external sync)
automatically.
INT*-► EXT
(6. 1) INT screen
— 6 SYNC -- <FILE A>
MODE INT
(6. 2) Changing EXT setting
■ Sync system display
•H PHASE -100 to 100
• SC 0/180 0,180
•SC PHASE -128 to 127
(a) Adjusting horizontal phase
© Set the to H PHASE by pushing [MENU UP], [MENU DOWN] buttons.
(D Adjust the horizontal phase by pushing [DATA UP], [DATA DOWN] buttons.
[DATA UP] -►
—
100
*-►
0
*-►
100
◄-[DATA DOWN]
(b) Performing coarse adjustment of sub carrier phase
© Set the to SC 0/180 by pushing [MENU UP], [MENU DOWN] buttons.
(D Select either 0 or 180 by pushing [DATA UP], [DATA DOWN] buttons.
(c) Adjusting sub carrier phase
© Set the " to SC PHASE by pushing [MENU UP], [MENU DOWN] buttons.
(D Adjust the sub carrier phase by pushing [DATA UP], [DATA DOWN] buttons.
[DATA UP] -►
— 127*-► 0*-► 128
◄-
[DATA DOWN]
36