Necessity of setting changes by combination of each method
Type of combination: Necessity of setting
Method 1 only: Setting is unnecessary.
Method 2 included: Setting up in common use of a solenoid valve kit from "Remote Control" is
necessary. *
1
* Method 2 only is set.
* Method 3 excluded
Method 3 included: Setting up in common use of a solenoid valve kit from a specific program
settings software is necessary. *
* Setting all connected indoor units
* Contact your local distributor to obtain a specific program settings software.
*1: Refer to "Test Run" for setting instructions.
Please note the following system example is prohibited and avoid the following connection.
Solenoid
valve kit
Indoor unit
Remote
controller
System 1
Solenoid
valve kit
Indoor unit
Remote
controller
1
Indoor unit
Indoor unit
Remote
controller
System 2
Solenoid
valve kit
Indoor unit
Solenoid
valve kit
Indoor unit
Remote
controller
Method 3 individual control is possible and group wiring should be
made by other solenoid valve kit.
Group wiring should be made by different type
of refrigerant.
35
Indoor unit
Remote
controller