Table of Contents
Advertisement
Cleaning and care
Cleaning the water intake fil-
ters
The washing machine has filters to pro-
tect the water intake valves. Check
these filters every 6 months or so.
Check the filters more often if there are
frequent interruptions to the external
water supply.
Cleaning the filters in the intake
hoses
First turn off the faucet.
Unscrew the intake hose from the
faucet.
Remove the rubber seal 1 from the
connector.
Using pointed pliers, take hold of the
plastic filter bar 2 and pull it through
the filter.
Clean the plastic filter.
Reassemble the appliance in reverse
order.
Make sure there is no water leaking
from the screw thread.
Tighten the screw thread.
56
Cleaning the filters in the water in-
take valves
Using pliers, carefully loosen the
ribbed plastic nut on the intake valve
and unscrew.
Use pointed pliers to grip the bar and
pull out the filter; then clean the filter.
Reassemble the appliance in reverse
order.
The filters must be put back in place
after cleaning.
Advertisement
Table of Contents
