Page 12
Room 70 G2) In-Room Control update (All products) A Cisco Webex Room Series device can have up to 30 Your CUCM may require a new device package in order to You can add buttons for as many panels as you want on paired clients simultaneously when the Proximity service expose the new fields for this configuration.
Device settings Appendices SX10 Quick Set at a glance The Cisco TelePresence SX10 Quick Set is an all-in-one unit designed to video-enable small collaboration spaces. It is a high quality unit that combines camera and codec into a compact device that is mounted over a standard flat-panel display.
Page 43
(CUCM, VCS); the pages shown in grey color are not available if the device is registered to the Cisco cloud service (Cisco Webex). In both cases, a user that is signed in, sees only the pages that he has access rights for.
Page 62
• You cannot add more participants on video. • Available only to CUCM registered devices, and the SIP Type setting must be Cisco. CUCM- • The conference is put on hold while calling a new participant. When the new particiant accepts the call you can...
UCM to the configuration settings from CUCM, the device, or both of them CUCM. device. The administrator had to rely on Cisco TMS or the web together. interface of the device to configure all the other settings.
Cisco recommended displays We have put in a lot of effort to minimize the camera to screen Cisco recommends using the following displays for the best experience and verified compatibility. The list delay on our video conferencing devices, and also to detect of displays is subject to change, check the CE9 Software Release Notes for updates.
Page 84
COP files. Download new software The SX, MX and DX series can be Each software version has a unique file name. Go to the Cisco upgraded from the web interface using Download Software web page, and select your product: PKG files.
Default value: Off (CUCM) version 9.1.2 or newer, Cisco TelePresence Video Communication Server (VCS) version X8.1 or newer, Cisco Media Server (CMS) version 2.1 or newer). Change this setting Value space: Off/On if you want to disable the active control features.
If multiple protocols are available, the order of priority is: 1) SIP; 2) H323; 3) H320. If the device cannot register, the auto-selection chooses H323. Value space: Off/On/BestEffort H320: All calls are set up as H.320 calls (only applicable if used with Cisco TelePresence Off: The device will not use encryption. ISDN Link).
Default value: Dynamic add participants to a conference (Direct Remote Add). If registered to a Cisco Unified Communications Manager (CUCM) version 8.6.2 or newer, Value space: Dynamic/Static the device also can use a CUCM conference bridge (set up by CUCM).
Define the Peap (Protected Extensible Authentication Protocol) mode. Authenticates LAN Authentication Protocol that relies on a shared secret. Md5 is a Weak security. clients without the need for client certificates. Developed by Microsoft, Cisco and RSA Security. Requires user role: ADMIN, USER...
Default value: Auto Value space: Auto/Manual/Off Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. If CDP is not available, VLAN is not enabled. Manual: The VLAN ID is set manually using the Network VLAN Voice VlanId setting. If CDP is available, the manually set value will be overruled by the value assigned by CDP.
NetworkServices CDP Mode NetworkServices HTTP Mode Enable or disable the CDP (Cisco Discovery Protocol) daemon. Enabling CDP will make the Define whether or not to allow access to the device using the HTTP or HTTPS (HTTP device report certain statistics and device identifiers to a CDP-enabled switch. If CDP is Secure) protocols.
NetworkServices HTTP Proxy Mode NetworkServices HTTP Proxy PACUrl You can configure a device that is registered to the Cisco Webex cloud service to use a Set the URL of the PAC (Proxy Auto Configuration) script. Requires that the proxy server for HTTPS and WebSocket traffic. The HTTP proxy for Cisco Webex can be NetworkServices HTTP Proxy Mode is set to PACUrl.
These password is "public". If you have the Cisco TelePresence Management Suite (TMS) you variables can then be queried (set to ReadOnly) and sometimes set (set to ReadWrite) by must make sure the same SNMP Community is configured there too.
Peripherals Pairing CiscoTouchPanels RemotePairing Peripherals Profile ControlSystems In order to use Cisco Touch 10 (touch controller) as user interface for the video conferencing device, Touch 10 must be paired to the device via the network (LAN). This is Define if a third-party control system, for example Crestron or AMX, is expected to referred to as remote pairing.
Appendices Peripherals Profile TouchPanels Define the number of Cisco Touch controllers that are expected to be connected to the device. This information is used by the device's diagnostics service. If the number of connected Touch controllers does not match this setting, the diagnostics service will report it as an inconsistency.
CUCM: The phonebook is located on the Cisco Unified Communications Manager. Spark: The phonebook is located in the Cisco Webex cloud service. TMS: The phonebook is located on the Cisco TelePresence Management Suite server. VCS: The phonebook is located on the Cisco TelePresence Video Communication Server.
Provisioning ExternalManager AlternateAddress This setting controls how the device discovers whether it should request an internal or Only applicable when the device is provisioned by Cisco Unified Communication Manager external configuration from the provisioning server. (CUCM) and an alternate CUCM is available for redundancy. Define the address of the alternate CUCM.
Expressway the encryption option key must be installed on the device. Value space: String (0, 64) Webex: Push configurations to the device from the Cisco Webex cloud service. A valid domain name. TMS: Push configurations to the device from TMS (Cisco TelePresence Management System).
On. The certificate check is always performed, regardless of this setting, if the device is provisioned from the Cisco Webex cloud service or from CUCM via Expressway (also known as MRA or Edge). Requires user role: ADMIN, USER...
In order to use a client, at least one of the Proximity services must be enabled (refer On for this setting to take any effect. to the Proximity Services settings). In general, Cisco recommends enabling all the Proximity services.
The ICE protocol needs some time to reach a conclusion about which media route to use When registered to a Cisco Unified Communications Manager (CUCM) the device may be (up to the first 5 seconds of a call). During this period media for the device will be sent to part of a shared line.
IP address. Value space: Standard/Cisco Requires user role: ADMIN Standard: Use this when registering to standard SIP Proxy (tested with Cisco TelePresence VCS). Default value: "" Cisco: Use this when registering to Cisco Unified Communication Manager.
If the device crashes, the device can automatically send logs to the Cisco Automatic Crash and when the device is acting as an SNMP Agent. Report tool (ACR) for analyses. The ACR tool is for Cisco internal usage only and not available to customers.
You can customize the user interface to allow control of peripherals in a meeting room, for example lights and blinds. You need a Cisco video conferencing device with a Touch 10 This allows for the powerful combination of a control system’s controller, and a control system.
Only one non-Cisco device can get a dynamic IP address at a time. SX80 • A non-Cisco device can be assigned a static IP address in the MX200 G2 / MX300 G2 range: 169.254.1.241 to 169.254.1.254 MX700 / MX800 This method can also be used to connect to the codec with SSH.
Appendices Register a device to the Cisco Webex cloud service Limitations You can register a device to Cisco Webex remotely from the web 1. Sign in to the web interface, and click Click here to register to interface instead of using the on-screen setup assistant.
Page 203
All images in these materials are for representational purposes only, actual products may differ. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners.
Cisco website at www.cisco.com/go/offices. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/ or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.