Replacing Batteries In The Remote Control; Replacing The Rechargeable Battery - Miele Scout RX3 Runner Operating Instructions Manual

en
Replacing batteries in the remote
control
2 batteries (AAA, 1.5 V) are required.
Observe the instructions regarding the
handling and disposal of batteries
found in the "Safety notes and warn-
ings" and "Caring for the environment"
sections at the beginning of these op-
erating instructions.
 Remove the battery compartment
cover.
 Replace the batteries. Make sure the
polarity is correct.
 Close the battery compartment cover.

Replacing the rechargeable battery

An original Miele lithium-ion re-
chargeable battery is required:
- YCR-M05 for Scout RX3
- YCR-MT12 for Scout RX3 Runner
and Scout RX3 Home Vision HD
The rechargeable battery compartment
is located in the robot vacuum cleaner's
storage compartment.
Observe the instructions regarding the
handling and disposal of rechargeable
batteries found in the "Safety notes
and warnings" and "Caring for the en-
vironment" sections at the beginning
of these operating instructions.
 Open the storage compartment.
 Remove the dust box.
72
 Open the rechargeable battery com-
partment by unlatching the cover up-
wards.
Scout RX3 (YCR-M05)
 Carefully pull the cables so that the
plug connection is pulled out of the
slot.
 Press the latch on the plug connec-
tion in order to release the plug.
 Remove the rechargeable battery.
 Insert the plug of the new re-
chargeable battery into the counter-
part, making sure it clicks into place.
 Insert the rechargeable battery care-
fully, making sure it is properly posi-
tioned (see right-hand side of pic-
ture).
 Store the plug connection in the slot
at the side.