Kenwood 1050SW Owner's Manual page 7

If your receiver or amplifier has
speaker (terminal outputs only:
Receiver or amplifier
Connect one end of the left
and right speaker wires to the
LEFT and RIGHT Front
speaker connectors on the
receiver or amplifier.
FRONT SPEAKERS A
(4-160)
+ [R] —
1050SW or 103SW Subwoofer
—({L]+
Connect the other end of VA R #- -— L
wires to the left and right
FROM AMPLIFIER connec- ©
tors on the subwoofer.
TO SPEAKERS
Connect your left and nght main
speakers to the TO SPEAKERS
connectors on the subwoofer.
Front speakers
ae be I
Caution: When connecting the
speaker to the amplifier or receiver,
be sure to always connect the posi-
tive (+) terminals to each other, and
the negative (-) terminals to each
other. Connecting the wrong termi-
nals together could damage the
amplifier or cause poor sound quality.
When connecting your speakers to
the system, make sure that their
impedance 1s within the allowable
range specified in the instruction
manual of your amplifier or receiver.
If the speaker impedance Is not
within the range, damage may occur
to your receiver, amplifier, or
subwoofer.