Table of Contents
Advertisement
Transporting the boiler
4
Transporting the boiler
DANGER
Risk to life through falling loads!
Falling loads can result in life-threatening injuries.
▶ Only transport the boiler by means of a crane, forklift truck pallet
truck or transport rollers.
▶ Only trained authorised personnel may undertake the handling (e.g.
by forklift truck) or lifting by means of a crane/hoist.
▶ Observe safety instructions relating to the lifting of heavy loads (e.g.
by means of a crane/hoist).
▶ Wear personal safety equipment (e.g. safety boots and protective
gloves).
▶ Protect the boiler against slippage by means of a transport strap.
CAUTION
Risk of injury through carrying heavy loads!
▶ Only transport the boiler by means of a crane/hoist, forklift truck or
transport rollers.
NOTICE
Boiler damage due to impact!
The boiler scope of delivery includes components that are susceptible to
impact damage.
▶ If the boiler has to be moved after delivery, protect all components
against shocks and impacts.
▶ Observe the transport instructions on the packaging.
The boiler may be transported to the place of installation by crane,
forklift truck or pallet truck. Where possible, transport the boiler to the
installation room in its shipping packaging to protect it from
contamination.
Fig. 3
Transport the floor standing boiler with pallet truck (example for
illustration purposes)
[1]
Pallet truck
12
4.1
Remove the burner to reduce the transport volume,
and install
Removing the burner
To reduce the transport volume during transport and delivery to the
installation location, the burner can be removed according to the
following description.
▶ Open the hose clamp on the air hose at the top and remove the air
hose (Fig. 4).
▶ Turn the inlet duct of the fan downwards (Fig. 5).
Fig. 4
Remove the air hose to the top
1
0010036119-001
Fig. 5
Turn the inlet duct of the fan downwards
0010041664-001
0010041667-001
Condens 7000 FP – 6721846699 (2022/12)
Advertisement
Table of Contents
