Table of Contents
Advertisement
1. Time at the current playback position.
2. Current playback position.
3. Extent of pause time, representing the amount of time this channel has been buffered, up to 90 minutes.
4. 90-minute mark, representing the maximum extent of pause time.
5. Current time.
The progress bar also displays tick marks at each half hour point, to help you locate the boundaries of where
one programme ends and a new one begins.
Notes about Live TV Pause
• You can use Live TV Pause only with broadcast channels received through the TV's RF IN input.
• Changing channels erases and restarts the Live TV Pause buffer.
• Returning to the Home screen, selecting another input or turning off the TV erases and resets the Live TV
Pause buffer.
• Disconnecting the USB drive erases the Live TV Pause buffer.
Switching TV inputs
Switch TV inputs to access the device connected to that input; for example, a Blu-ray™ player. Switching inputs
is as easy as highlighting the input on the Home screen and pressing OK. The video signal on the input, if any,
plays on the screen.
Auto-detecting devices
Your TV automatically detects when you connect a new device to an HDMI input and turn on its power. The
input is automatically added to the Home screen if it isn't already present.
Adjusting audio/video settings
While watching video content on any input, press
to highlight an option, and then press LEFT or RIGHT to change the setting.
Setting preferred audio language for streaming channels
You can select the preferred language for the audio played by streaming channels. If the selected language is
available in the streaming content, the TV plays that language.
To set the preferred audio language:
1. From the Home Screen Menu, navigate to Settings > Audio > Audio preferred language.
2. Press RIGHT to highlight one of the languages.
STAR to display the TV settings menu. Press UP or DOWN
33
33
Advertisement
Table of Contents
