Adjustments - Sony RM-M7G Service Manual

Remote control unit
Table of Contents

Advertisement

SECTION
1
Outline
The RM-M7G is a remote control unit designed for the Sony
DXC-M7 video camera. Various adjustment functions of the
camera can be remotely controlled with this unit.
Remote control capability for various
adjustments
The unit allows remote control of the adjustments
required for camera recording, such as automatic and
manual adjustments of white balance, black balance and
lens iris, gain selection of the video amplifier and
pedestal level control, etc. Also, the knee, gamma and
details adjustment functions provide high-quality pictures
under various shooting conditions.
Easy connections
You can easily connect this unit and a video camera by
using the camera remote control cable CCA-7-5/25/50/100
(optional).
Built-in electronic shutter speed
controller
The built-in electronic shutter controller controls the
camera's electronic shutter so that moving objects can
be recorded clearly. When you record pictures after
selecting an appropriate shutter speed, you can obtain
clear still and slow motion pictures in playback.
Precautions
On installation
Do not install the unit near a heat source such as a
radiator or an air duct, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.
On cleaning
Clean the cabinet, panel and controls with a dry soft
cloth, or a soft cloth lightly moistened with a mild
detergent solution. Do not use any type of solvent, such
as alcohol or benzine, which might damage the finish.
RM-M7G (UC)
GENERAL
DESCRIPTION
When a CCU-M7 camera control unit is connected to the
camera, this unit can also control the adjustment functions
of the camera through the camera control unit.
Installation on a CA-M7 studio adaptor
This unit can be used as an operation panel of the
camera if you connect this unit to a CA-M7 studio
adaptor exclusively designed for a DXC-M7 video camera
by using the connecting cable supplied with the CA-M7.
Connection to a monitor
You can connect this unit to a monitor through the
MONITOR connector on the rear to make sure of the
pictures recorded by the camera.
However this connector has no cable compensator
function so the longer the cable length, the more the
output level of the monitored pictures may decrease.
On transportation
Save the original carton and associated packing material.
They will be useful should you have to transport or ship
the unit.
If you have any questions about this unit, contactyour
Sony dealer.
S
E
a
B
is
z
[oa
rf
oO

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm-m7gp

Table of Contents