2.3
List of Jumpers
Please refer to the table below for all of the system's jumpers that you can configure
for your application.
Label
Function
JP1
Clear CMOS Jumper
JP3
AT/ATX Mode Selection
PEG Lanes CFG2 Selection
JP4
PCI Express x16 Lane Selection
JP5
PEG Lanes CFG2 Selection
2.3.1
Clear CMOS Jumper (JP1)
1 2 3
Normal (Default)
2.3.2
AT/ATX Mode Selection (JP3)
ATX (Default)
Note: AT Mode JP3(2-3): ATX power button JP3 (1-2) to power on the system.
Chapter 2 – Hardware Information
Clear CMOS
AT
10