Page 2
Date of purchase: Place of purchase: Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies’ product names or trademarks are used herein for identification purposes only and belong to their respective companies. HDMI™, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Page 3
Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Page 4
Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: y the power cord or plug is damaged, cut or frayed y liquid was spilled into the product y the product was exposed to rain or water...
Page 5
For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www. acer-group.com/public/Sustainability/sustainability01.htm Do not stare into the beam IEC 60825-1:2014, EN 60825 1 2014 A11 2021, EN 50689:2021 CLASS 1 CONSUMER LASER PRODUCT RISK GROUP 2, Complies with 21 CFR 1040.10 and 1040.11 except for...
Page 6
Do not stare into beam, RG2 As with any bright source, do not stare into the direct beam, RG2 IEC 62471-5:2015. RG 2 Notice is given to supervise children and to never allow them to stare into the projector beam at any distance from the projector.
Page 7
First things first Usage otes Doe: y Turn off the product before cleaning. y Use a soft cloth moistened with mild detergent to clean the displayhousing. y Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’te: y Block the slots and openings on the unit provided for ventilation.
TABLE OF CO TE TS INTRODUCTION ................10 Package Overview........................10 Standard accessories ....................... 10 Optional accessories ........................ 10 Product Overview ........................11 Connections..........................12 Keypad ............................. 13 Remote control ......................... 14 SETUP A D I STALLATIO ............15 Installing the projector ......................15 Connecting sources to the projector ..................
Page 9
ADDITIONAL INFORMATION ............41 Compatible resolutions ......................41 Image size and projection distance ..................44 1080p series for 1.1x zoom ratio ....................47 Projector dimensions and ceiling mount installation ..............48 Troubleshooting ........................49 Warning indicators ........................50 Specifications ........................... 52 English...
INTRODUCTION Package Overview Carefully unpack and verify that you have the items listed below under standard accessories. Some of the items under optional accessories may not be available depending on the model, specification and your region of purchase. Please check with your place of purchase. Some accessories may vary from region to region. The warranty card is only supplied in some specific regions.
INTRODUCTION Product Overview otee: Do not block projector intake and exhaust vents. When operating the projector in an enclosed space, allow at least 30 cm clearance around the intake and exhaust vents. Functions vary depending on model definition. Item Item Focus Ring...
INTRODUCTION Connections 4 5 6 Item Item USB connector (for wifi dongle) DC 5V out(service) HDMI 1 Connector Audio out Connector HDMI 2 Connector DC IN RS232 Connector Kensington™ lock port otee: Functions vary depending on model definition. Smartphone charging is not supported via USB power out connector.
Do not operate the projector in any orientation other than table top or ceiling mount. The projector should be horizontal and not tilted either forwards/backwards or left/right. Any other orientation will invalidate the warranty and may shorten the lifetime of the projector light source or the projector itself. For none standard installation advise, please contact Acer. English...
Page 16
SETUP A D I STALLATIO Projector installation notice otee: The brightness will be reduced 80% when the projection direction is downward. 225°~315° ±5° Portrait mode Air outlet side 10° 10° 10° 10° 10° 10° Allow at least 30 cm clearance around the exhaust vent. Minimum 100mm Minimum 300mm Minimum 300mm...
Page 17
SETUP A D I STALLATIO Minimum 100mm Minimum 100mm (3.94 inches) (3.94 inches) Ensure that the intake vents do not recycle hot air from the exhaust vent. When operating the projector in an enclosed space, ensure that the surrounding air temperature within the enclosure does not exceed operation temperature while the projector is running, and the air intake and exhaust vents are unobstructed.
SETUP A D I STALLATIO Connecting sources to the projector Speakers Item Item Power cord USB cable HDMI cable Audio cable RS232 cable Wireless dongle otee: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector.
SETUP A D I STALLATIO Adjusting the projector image Image height The projector is equipped with elevator feet for adjusting the image height. Locate the adjustable foot you wish to adjust on the underside of the projector. Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector. Tilt-Adjustment Feet Tilt-Adjustment Ring Zoom and focus...
SETUP A D I STALLATIO Remote setup Installing / replacing the batteries Press firmly and slide the battery cover off. Install new battery into the compartment. Remove the old battery and install new one (CR2025). Ensure that the side with a “+” is facing up. Put the cover back.
Page 21
SETUP A D I STALLATIO Effective range Infra-Red (IR) remote control sensor is located on the front sides of the projector. Ensure to hold the remote control at an angle within 30 degrees perpendicular to the projector’s IR remote control sensor to function correctly. The distance between the remote control and the sensor should not be longer than 6 meters (16.4 feet).
USING THE PROJECTOR Powering on / off the projector Lens cap Powering on Remove the lens cap. Securely connect the power lead and signal/source cable. When connected, the Power LED will turn red. Turn on the projector by pressing the button on the projector keypad or remote control.
USING THE PROJECTOR Selecting an input source Turn on the connected source that you want to display on the screen, such as computer, notebook, video player, etc. The projector will automatically detect the source. If multiple sources are connected, press the Source button on the remote control or keypad to select the desired input.
USING THE PROJECTOR Menu navigation and features The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. To open the OSD menu, press the Menu button on the remote control or keypad. When OSD is displayed, use pq keys to select any item in the main menu.
USING THE PROJECTOR OSD Menu tree Main Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Menu Presentation Bright HDR/HLG SIM. Display Mode Cinema Football User Brightness -50 ~ 50 Contrast -50 ~ 50 Sharpness 1 ~ 15 Color -50 ~ 50 Tint...
Page 26
USING THE PROJECTOR Main Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Menu DynamicBlack Eco. Brightness Mode Image Settings Power (Power = 100%~40%) Reset Off [Default] 3D Mode Auto [Default] 3D Format Top and Bottom Frame Sequential Display 3D Sync Invert Off [Default]...
Page 27
USING THE PROJECTOR Main Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Menu Front [Default] Projection Rear Auto Projection Desktop Location Ceiling Off [Default] AC Power On Auto Power On Off [Default] Power Settings HDMI Power On Auto Shutdown 0 ~ 180 (5 min increments) (min.)
Page 28
USING THE PROJECTOR Main Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Menu ไทย Türkçe Language Tiếng Việt Bahasa Indonesia Українська Options Off [Default] Auto Source Setup Off [Default] High Altitude Default [Default] Logo User Cancel [Default] Reset Reset to Default Serial Number...
USING THE PROJECTOR Display menu Display image settings menu otee: Functions vary depending on model definition. Display Mode There are many factory presets optimized for various types of images. Presentation: This mode is suitable for showing in front of public in connection to the PC. ...
Page 30
USING THE PROJECTOR If the Display Mode setting is set to DICOM SIM., user can only select DICOM SIM. for Gamma setting. If the Display Mode setting is set to HDR SIM. or HLG SIM., user can only select HDR SIM. or HLG SIM.
USING THE PROJECTOR Display 3D menu otee: This projector is a 3D ready projector with DLP-Link 3D solution. Please make sure your 3D glasses are use for DLP-Link 3D before enjoy your video. This projector supports frame sequential (page-flip) 3D via HDMI/VGA ports. ...
Page 32
USING THE PROJECTOR XGA scaling table: 16e:9 screen 480i/p 576i/p 1080i/p 720p Scale to 1024x768. 16x9 Scale to 1024x576. Native No scaling will be made; the image is displayed with the resolution based on input source. Auto - If source is 4:3, the screen type will be scaled to 1024 x 768. - If source is 16:9, the screen type will be scaled to 1024 x 576.
Page 33
USING THE PROJECTOR WXGA scaling table (screen type 16x10): otee: Supported screen type 16:9 (1280x720), 16:10 (1280x800). When screen type is 16:9, the 16x10 format becomes unavailable. When screen type is 16:10, the 16x9 format becomes unavailable. ...
Page 34
USING THE PROJECTOR WXGA scaling table (screen type 16x9): 16 e: 9 screen 480i/p 576i/p 1080i/p 720p Scale to 960x720. 16x9,Full Scale to 1280x720. Scale to 1280x960, then get the central 1280x720 image to display. Native mode 1:1 mapping centered. 1:1 mapping 1280x720 1:1 mapping...
USING THE PROJECTOR Audio menu otee: Functions vary depending on model definition. Audio mute menu Mute Use this option to temporarily turn off the sound. One: Choose “On” to turn mute on. Off: Choose “Off” to turn mute off. otee: Mute function affects both internal and external speaker volume.
USING THE PROJECTOR Setup menu otee: Functions vary depending on model definition. Setup projection menu Projection Select the preferred projection between front and rear. Projection Location Select the projection location between auto,desktop and ceiling. Setup power settings menu AC Power On Choose “On”...
USING THE PROJECTOR Setup HDMI Link settings menu otee: When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them on the same power on or power off status using the HDMI Link control feature in the projector’s OSD. This lets one device or multiple devices in a group power on or power off via HDMI Link Feature in a typical configuration, your DVD player may be connected to the projector through an amplifier or home theater system.
Page 39
USING THE PROJECTOR Copy and Click Splash Downloader Copy the Acer_Splash_Downloader folder from the CD (User’s Guide) to your computer, click the Acer_Splash_Downloader.exe program, and follow the on-screen instructions. If the message says “Projector found”, the projector has been connected successfully. otee: If “Error: No Projector found.”, the projector is not connected.
USING THE PROJECTOR Setup reset OSD menu Reset to Default Return the factory default settings for all settings except network setting. Info menu otee: Functions vary depending on model definition. Info menu View the projector information as listed below: Serial Number ...
ADDITIONAL INFORMATION Compatible resolutions Digital compatibility Signal Resolution Refresh Rate(Hz) Notes for Mac 640 x 480 60/120 Mac 60/72/85/ (*2) SVGA 800 x 600 /72/85/120 Mac 60/72/85 (*2) (*2) 1024 x 768 50/60 /70/75/85/120 Mac 60/70/75/85 (*2) (*2) SDTV(480I) 720 x 480 SDTV(480P) 720 x 480 SDTV(576I)
Page 42
ADDITIONAL INFORMATION Analog compatibility Signal Resolution Refresh Rate(Hz) Notes for Mac 640 x 480 60/67/72/85/120 Mac 60/72/85/ (*2) SVGA 800 x 600 56/60 /72/85/120 Mac 60/72/85 (*2) (*2) 1024 x 768 /70/75/85/120 Mac 60/70/75/85 (*2) (*2) HDTV(720P) 1280 x 720 50/60 Mac 60 (*2)
Page 43
ADDITIONAL INFORMATION True 3D video compatibility Input timing 1280 x 720P @ 50Hz Top-and-Bottom 1280 x 720P @ 60Hz Top-and-Bottom HDMI 3D Input 1280 x 720P @ 50Hz Frame packing (with 3D 1280 x 720P @ 60Hz Frame packing InfoFrame 1920 x 1080i @ 50Hz Side-by-Side(Half) information)
ADDITIONAL INFORMATION Image size and projection distance WXGA Series for 1.1x zoom To obtain an image size of 60” set the projector at a distance 200 cm and 222 cm from the screen. 60” Desired image size Height: 91 cm from base to top of image 200 cm...
Page 45
ADDITIONAL INFORMATION XGA Series for 1.1x zoom To obtain an image size of 60” set the projector at a distance 237 cm and 263 cm from the screen. 60” Desired image size Height: 105 cm from base to top of image 237 cm 263 cm...
Page 46
ADDITIONAL INFORMATION 1080p series for 1.3x zoom ratio To obtain an image size of 60” set the projector at a distance 149 cm and 195 cm from the screen. 60” Desired image size Height: 87 cm from base to top of image 149 cm 195 cm...
ADDITIONAL INFORMATION 1080p series for 1.1x zoom ratio To obtain an image size of 60” set the projector at a distance 197 cm and 215 cm from the screen. 60” Desired image size Height: 87 cm from base to top of image 197 cm 215 cm...
ADDITIONAL INFORMATION Projector dimensions and ceiling mount installation To prevent damage to your projector, please use the Acer ceiling mount. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: ...
ADDITIONAL INFORMATION Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image problems No image appears on-screen Ensure all the cables and power connections are correctly and securely connected as described in the "Installation"...
ADDITIONAL INFORMATION Other problems The projector stops responding to all controls If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before reconnecting power. Remote control problems If the remote control does not work ...
Page 51
ADDITIONAL INFORMATION Power off: Power Off Power Off? Press power key again. Temperature warning: Warning TEMPERATURE TOO HIGH Please: 1. Make sure air in and outlets are not blocked. 2. Make sure the environment temperature is under 45 degree C. If the problem persists in spite of the above.
ADDITIONAL INFORMATION Specifications Optical Description Maximum resolution Up to 4K resolution (1080P model only) XGA 1024(H) x 768(V) Native resolution WXGA 1280(H) x 800(V) 1080p 1920(H) x 1080(V) Lens Manual zoom and manual focus XGA: 30”~300” (76.2cm~762cm) Image size (diagonal) ...
Page 53
ADDITIONAL INFORMATION Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 54
Recycling Information for the United States of America Acer encourages information technology (IT) equipment owners to responsibly recycle their equipment when it is no longer needed. Acer offers programs and services to assist equipment owners with this process.