Connect Premium IP Desk Phone to handset.
1
Take the long end of the handset cable
at the back of the phone
next, plug the short end of the cable into the
E
bottom of the handset
tuck the cable into the horizontal cable slot on the
F
back of the phone.
E
DC 5V
Connect Premium IP Desk Phone to foot stand
2
Take the foot stand
and connect it into the back of the phone
G
Make sure the Cisco logo is facing outwards.
E
AUX
DC 5V
and plug it into the handset jack
C
AUX
C
F
G
cisco
Connect Premium IP Desk Phone to the internet.
3
Take the network cable
of the phone
Then plug the other end of the cable into a spare internet connected
LAN port on your modem or switch. If your switch supports Power over
Ethernet (PoE), the phone will begin powering up – go to step 5.
E
Connect power to the Premium IP Desk Phone (optional)
4
If you have purchased the optional power cube
E
for your phone
into a power source.
and plug it into the network port at the back
D
tuck the cable into the horizontal cable slot.
E
AUX
Modem/Switch
DC 5V
D
, connect it to the power input port and plug the other end
E
AUX
B
A
DC 5V
D
and power cord
A
B
E