Sharp PureBlend Series User Manual page 6

Assembly
Carefully assemble PureBlend Mixer & Grinder, as blades are very sharp.
WARNING: Make sure that the Mixer & Grinder is switched off and unplugged.
1. Clean the Mixer & Grinder attachments before using it for the first time with
damp cloth.
2. Insert the Mixer & Grinder blades into the appropriate jar and turn until locks
nto position.
3. Place the jar on the main unit through the jar base.
4. Put the ingredients to be processed in the jar.
5. Fix the appropriate jar lid firmly on the jar ensuring that the lid has locked in
securely from all side.
6. The Mixer & Grinder can now be plugged in and is ready to use.
7. Use speed control knob and move gradually from lower to higher speeds. After
use, unplug the Mixer & Grinder.
Instruction to use the Mixer & Grinder
To use the Mixer & Grinder for the first time or after a long period of non-usage:
• After unpacking the mixer grinder, wash the jars and blades with mild
detergent and dry it thoroughly.
• Please rotate the motor shaft by hand to ensure that it
turns freely & smoothly. Make sure the unit is not connected
to the power source.
• Before fixing the jar to the main unit, rotate the jar coupler
to ensure that it turns freely onto the aluminium jar base that
has to be fitted onto the main unit. Hold the base and rest it
on the main unit.
• Plug the mains cord in the wall socket & switch the power ON.
•Do not touch the jar with bare hands immediately after using the mixer.
The speed of operations is marked with circular dots in increasing order of speed.
Pulse shall be used for momentary operation.
NOTE: Pictorial representation illustrated in the user manual are indicative only,
parts provided with the product may differ with illustrations.
WARNING: Do not run the mixer & grinder unless lid is in place and held firmly with hand.
4