Equipment Labels - Philips 4523 001 21821 Manual

5 Technical Information
Declaration of Conformity for Radio Equipment
Hereby, Philips Medical Systems Nederland B.V. declares that this wireless foot switch radio equipment is
in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available on request from the manufacturer.
For the United States and Canada, the radio conformity is based on radio module license grants:
Equipment
Wireless foot switch (3P and 4P+2),
wireless base station
Coexistence and Parallel Operation
Simultaneous operation with WLAN or Bluetooth networks is possible. If there are repeated disturbances
(radio disconnection), radio network planning should be carried out.
IP Rating
Equipment
Wireless foot switch
Mains Power
Equipment
Wireless foot switch charger
Electromagnetic Emissions and Immunity
For information about electromagnetic emissions and immunity, refer to the Instructions for Use supplied
with the X-ray system.
5.1

Equipment Labels

Monoplane Wireless Foot Switch Labels
The following labels appear on the monoplane wireless foot switch. There are two models of foot switch:
an earlier model referred to as type 1 and a later model referred to as type 2. These models can be
distinguished by the different product names on the product label.
NOTE
The following images are indicative of the actual labels used on the equipment.
Type 1 Product Label
Wireless Foot Switch Addendum
FCC License Grant Number
XK5-SW100AMBINT or XK5-SW24LE
IP Rating
IPX8
Mains Voltage Mains Frequency
100 - 240 V AC 50 / 60 Hz
Type 2 Product Label
15
IC License Grant Number
5158A-SW100AMBINT or 5158A-
SW24LE
Protection
Protected against the effects of continuous
immersion in water
Maximum Power Consumption
26 W
Equipment Labels
Philips 4523 001 21821