Table of Contents
Advertisement
en Installation and connection
Spin the laundry in the washing ma-
chine before drying.
a Damper laundry extends the pro-
gramme duration and increases
energy consumption.
Observe the programme's maximum
load capacity.
→ "Programmes", Page 21
a If the maximum load is exceeded,
this extends the programme dura-
tion and increases energy con-
sumption.
After drying, clean the fluff filter
→ Page 26.
a If the fluff filter is dirty, this reduces
the air flow in the appliance, ex-
tends the programme duration and
increases energy consumption.
Regularly clean the base unit
→ Page 31.
a If the heat exchanger is dirty, this
extends the programme duration
and increases energy consump-
tion.
3.3 Energy saving mode
If you do not use the appliance for an
extended period, it automatically
switches to energy-saving mode. All
displays go out and Start/Reload
flashes.
Energy-saving mode ends when you
use the appliance again.
12
Installation and connection
4 Installation and con-
nection
Installation and connection
4.1 Unpacking the appliance
ATTENTION!
Objects remaining in the drum that
are not designed for operation with
the appliance may cause material
damage and damage to the appli-
ance.
Remove these objects, along with
▶
all supplied accessories, from the
drum before starting the appliance.
Remove any packaging and pro-
1.
tective covers completely from the
appliance.
→ "Disposing of packaging",
Page 11
Check the appliance for visible
2.
damage.
Open the door.
3.
Remove any accessories from the
4.
drum.
Close the door.
5.
4.2 Contents of package
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
ATTENTION!
If the appliance is operated with in-
complete or defective accessories,
the appliance may not be able to op-
erate properly, or this may result in
material damage or damage to the
appliance.
Do not operate the appliance with
▶
incomplete or defective accessor-
ies.
Advertisement
Table of Contents
