When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. •...
Page 4
75BDL4003H • Environmental absolute ratings Item Min. Max. Unit Storage temperature °C Operation temperature °C Glass Surface temperature °C (Operation) Storage humidity % RH Operating humidity % RH • LCD panel temperature need to be 25 degrees Celsius at all time for better luminance performance.
Page 5
75BDL4003H Read and follow these instructions when connecting and using your display: • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is off.
Page 6
75BDL4003H TPV USA Corp 6525 Carnegie Blvd #200 Charlotte, NC 28211 Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source.
Page 7
75BDL4003H Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows:+ 1. Remove fuse cover and fuse.
Page 9
Please find out about the local regulations on how to dispose of your old display from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
Page 10
For more information about E -waste please visit http://www.india.philips.com/about/sustainability/recycling/index.page and to know where you can drop off your waste equipment for recycling in India please contact on below given contact details.
Page 11
75BDL4003H Batteries For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation.
75BDL4003H Unpacking and Installation 2.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • As this product is high and heavy, the operation of moving the device is recommended to be performed by two technicians.
Page 13
75BDL4003H • Place the display vertically and its weight should spread evenly on the surface. • Please keep vertically, no bending and torsion during moving the display.
Page 14
75BDL4003H Unpacking Process 4. Install the wall mount kit (*) while the display is still in the ■ bottom cushion.(*need to purchase separately) 1. Remove the tape. 5. Two people on the sides should hold the top handles from the back of the display, while two others help hold 2.
75BDL4003H 2.4. Mounting on a Wall To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you use a mounting interface that complies with TUV-GS and /or UL1678 standard in North America.
75BDL4003H 2.5. Mounting in Portrait Orientation This display can be installed in portrait orientation. Rotate the display 90 degrees Clockwise. The “ ” logo should be on the left side when facing the display. 90° 90° 2.5.1. How to remove the logo 1.
75BDL4003H 2.6. Ventilation Requirements for 3. Heater (for low temperature environment ): Place the heater at the bottom of the enclosure. enclosure location • The operating temperature for the display is 0°C~40°C • Keep sufficient space for heat dispersal. •...
75BDL4003H 2.7. Avoid direct exposure of the screen to the sun Avoid direct exposure to the sun on the screen To prevent a temperature rise on the front of the product due to sunlight, avoid direct exposure of the screen to the sun.
75BDL4003H Parts and Functions 3.1. Control Panel [ ] button [MENU] button Press this button to turn the display On or turn the Return to the previous menu while the OSD menu is On. display to standby mode. This button can also be used to activate the OSD menu when the OSD menu is Off.
75BDL4003H 3.2. Input/Output Terminals RJ45 USB 2.0 Service Port PC LINE IN AUDIO OUT RS232 RS232 IR-IN IR-OUT DP IN DVI-I IN HDMI 1 IN HDMI 2 IN HDMI 3 IN HDMI OUT DP OUT 9 10 11 AC IN PC LINE IN AC power input from the wall outlet.
75BDL4003H 3.3. Remote Control ] POWER button Turn the power On. 3.3.1. General functions Turn the power Off. [PLAY] buttons Fast Rewind/Play/Fast forward/Stop/Pause ] HOME button Access the OSD menu. ] SOURCE button Choose input source. Press [ ] or [...
75BDL4003H 3.3.2. ID Remote Control Press [ID] button. The red LED blinks twice. 1. Press [ID SET] button for more than 1 second to enter the Set the remote control ID if you intend to use this remote ID Mode. The red LED lights up.
75BDL4003H 3.3.3. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Insert batteries with the correct polarity (+) and (-).
75BDL4003H 3.4. Installing the OPS device • Please ask for the assistance of the professional to install the device. • Ensure the display is powered off. 1. Remove the IPC cover. Keep it for future use. 2. Follow the installation guide of the OPS device to install the OPS to the display in correct direction.
75BDL4003H 3.6. AC Switch Cover cover the AC switch • Use AC Switch Cover to 1. Install the AC Switch Cover. 2. Fix the AC Switch Cover with the screw provided as an accessory. (M3 screw) 3.7. Wire Clamper •...
75BDL4003H 3.8. Operating Instructions of Edge Alignment Kit 3.8.1. Installing the Edge Alignment Kit • Before installing the edge alignment kit, the display must be mounted to the frame of video wall correctly. • We recommend you contact a professional technician when installing the edge alignment kit. We are not responsible for any damage to the product if the installation is not performed by a professional technician.
75BDL4003H Open Frame Kit 3.9. • You can use the Open Frame Kit to mount the display to the frame of kiosk. • Please ask for the assistance of the professional to install the display with the Open Frame Kit.
75BDL4003H Connecting External Equipment 4.1. Connecting External Equipment (Multimedia Player) 4.1.1. Using HDMI video input RS232 RS232 HDMI IN DVI-I Multimedia Player [HDMI IN] HDMI Out 4.2. Connecting a PC 4.2.1. Using DVI input [PC LINE IN] PC LINE IN...
75BDL4003H 4.2.3. Using DP input RS232 RS232 DVI-I DP IN DP Out [DP IN] 4.3. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a menu board. 4.3.1. Display control connection Connect the [RS232 OUT] connector of DISPLAY 1 to the [RS232 IN] connector of DISPLAY 2.
75BDL4003H 4.5. IR Pass-through Connection [IR OUT] Multimedia Player [IR IN] Remote Control 4.6. Wire-connecting to Network INTERNET ROUTER [RJ-45] [RJ-45] Network Settings: 1. Switch the router on and enable its DHCP setting. 2. Connect the router to this display with an Ethernet cable.
75BDL4003H Operation NOTE: The control button described in this section is mainly on the remote control unless specified otherwise. 5.1. Play multimedia files from USB device 1. Connect your USB device to the USB port on the display. RJ45 USB 2.0 8.
75BDL4003H OSD Menu 6.2. OSD Menu Overview An overview of the On-Screen Display (OSD) structure is shown 6.2.1. Picture menu below. You can use it as a reference for further adjustment of your display. Picture Brightness 6.1. Navigating the OSD Menu...
75BDL4003H Smart Picture Clock Phase PQ setting Improves focus, clarity and image stability by increasing or decreasing this setting. {Standard}/{Highbright}/{Warm} NOTE: VGA input only. Smart Power Zoom Mode Smart Power control is not relative to brightness control: PC mode: {Full} / {4:3} / {1:1} / {16:9}/ {Custom}.
75BDL4003H Audio source V position Moves the vertical position of the image Select the audio input source. up or down. Analog: audio from audio input. Digital : audio from HDMI/DVI audio. DisplayPort: audio from DP. Auto Adjust Audio Reset Press “Set” to detect and adjust H position, V position, Clock, Phase automatically.
NOTE: If the external sensor box CRD41 is connected, the The options are: {1 - 60} seconds. CRD41 will prioritize this setting. Logo Human Sensor (require Philips accessory CRD41 External Choose to enable or disable the picture of Logo when turning Sensor Box) on your display.
75BDL4003H Heat Status Configuration2 reset This function allows you to check the thermal status at any Reset all settings in Configuration2 menu to the factory preset time. values. Behavior/Temp. 6.2.6. Option menu Fan turn Off 38°C Fan turn On 40°C...
Page 38
75BDL4003H NOTE: “Keyboard Control Lock Mode” This function {ACS}: Apply brightness value (backlight) which is adjusted completely disables the access to all Keyboard by MIC tool. The default value before adjustment is the Control functions. To enable or disable the keyboard same as OSD brightness value, e.g., 70)
Page 39
75BDL4003H When “daylight saving” is “on”, the real time clock will be 1~7: playlist number. adjusted automatically at the daylight saving time (e.g. April USB Autoplay: autoplay function. 5, 2015, 02.00 o’clock: time will be set 1 hour later or October •...
Page 40
75BDL4003H go to the source defined in this OSD option. Scheduler: When the display is powered on by scheduler, it will go to the corresponding source according to the current time. User operation: No matter what current source it is, when user manually changes source, the failover will suspend.
75BDL4003H Supported Media Formats USB Multimedia Formats Video format Video Codec Resolution Bit Rate MPEG1/2 1080P@30fps 40Mbps H.264 4096x2160@60fps 135Mbps HEVC/H.265 4096x2176@60fps 100Mbps Motion JPEG 640x480@30fps 40Mbps Audio format Audio Codec Sampling Rate Channel Bit Rate MPEG1/2 Layer1 16KHz-48KHz Up to 2...
However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- &...
Pixel Defect Tolerances In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Philips Plasma / LCD- display must have pixel or sub-pixel defects exceeding the tolerances listed in the following table.
75BDL4003H HOW TO AVOID MURA Although we can not guarantee the complete eradication of Mura every time, in general the appearance of Mura can be minimized by these methods: • Lower the backlight brightness • Use a screen saver •...
75BDL4003H 10.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of 2. Make sure the power switch is switched the display is not switched on.
75BDL4003H 11. Technical Specifications Display: Item Specifications Screen Size (Active Area) 1893 mm / 74.5 inch Aspect Ratio 16:9 Number of pixels 3840 (H) x 2160 (V) Pixel pitch 0.429 (H) x 0.429 (V) [mm] Displayable colors 10 bit(D), 1.07 Billion colors...
Page 48
75BDL4003H General: Item Specifications Power Input 100 - 240V~, 50/60Hz Power Consumption (Max) 790 W Power Consumption (Typ.) 510 W Power Consumption (Standby & Off) <0.5 W Dimensions [W x H x D] 1688.2 x 966.6 x 128.0 mm Weight 58.5 Kg...
LIMITED WARRANTY In the unlikely event the product requires service, we will arrange for your Philips product to be serviced free-of-charge within the warranty period, provided that the product was used in accordance with the user manual (e.g. in the intended environment).
Page 50
Warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow their warranty statement. Standard warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow the local warranty statement.
Pixel Defect Policy 40 Play multimedia files from USB device 29 Remote Control 19 Safety Instructions 1 Supported Media Formats 38 Technical Specifications 44 Unpacking 10 Unpacking and Installation 10 USB Cover 22 Warranty policy for Philips Professional Display Solutions 46...
Page 52
Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trade- marks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice. Version:V1.00 2023-08-01...